1941 320 intake n exhaust

[41specialman]

For sale 1941 320 intake and exhaust complete no cracks with carburators and air cleaner $1800.00 plus shipping OBO 

(970)619-9924

[1939_Buick]

Is this a dual carb set up?

Photos?

Location?

[shanezwarg]

 

6 hours ago, 1939_Buick said:

Is this a dual carb set up?

Photos?

Location?

I have a 41 320 dual carb set, complete, fuel lines, linkage, rebuild kits for carbs, and a nos extra front carb in box. Spokane wa. 5099810972. If this deal doesn't work out. 

[Matt Harwood]

Are you both certain they are 320 setups? I bought one recently that was represented as fitting a 320 and it was for the small series cars. Disheartening, but at least it didn't cost $1800. I'm a buyer if you have uncracked exhaust manifolds. I don't need the rest but I understand if you'd rather sell as a package.

 

Please post photos and measurements!

[41specialman]

On 12/14/2017 at 9:11 AM, Imperial62 said:

Post photos and numbers to verify it's off a 320, please.  Your sign on is "41specialman" after all. 

Yes specialman as I have a 44s but these are 320 series off a century and roadmaster 

[41specialman]

On 12/14/2017 at 8:33 AM, shanezwarg said:

 

I have a 41 320 dual carb set, complete, fuel lines, linkage, rebuild kits for carbs, and a nos extra front carb in box. Spokane wa. 5099810972. If this deal doesn't work out. 

 

[41specialman]

On 12/14/2017 at 2:01 AM, 1939_Buick said:

Is this a dual carb set up?

Photos?

Location?

Yes it is dual 

[41specialman]

On 12/14/2017 at 8:36 AM, Matt Harwood said:

Are you both certain they are 320 setups? I bought one recently that was represented as fitting a 320 and it was for the small series cars. Disheartening, but at least it didn't cost $1800. I'm a buyer if you have uncracked exhaust manifolds. I don't need the rest but I understand if you'd rather sell as a package.

 

Please post photos and measurements!

 

[kgreen]

Would you mind going a couple steps further?

• Close up pictures top side and bottom focusing on the exhaust manifold
• Lay a yard stick across the bottom of the manifold with one end even with the front of the part.
• Photo of any numbers on the part

I'm not a buyer but I think this would help others and you to get this part sold.