Ring & Pinion Gear Set for 1926 Buick Standard

[Dave Chiotti]

I need Ring  & Pinion Gear Set for 1926 Buick Standard Model 26-28

[Steve Moskowitz]

Dave, I am on it for you!  Hope to have an answer soon. 

[sligermachine]

i think i have one its been inside for 50 years  

this is the # off the frame but would rather u take the hole rear end  . im looking for a wind shield frame lower for a 1925 roadster

[Oregon Desert model 45]

Hi Sligermachine

that rear axle in your photo is either 1924 or 1925 Master.  The driving hub is a Master only feature. Brake levers are 1924-1925 style which changed for 1926. If you can get measurement of wheel diameter at the larger diameter the year could be confirmed. Torque tube length is approx. 61" for the 128" wheelbase cars, and approx. 53" for 120" wheelbase models.

 

Kevin

 

[sligermachine]

cool i just bought them. the owner had pased  so no one knew much or did not fill like talking  . thank you   kyle 

[Leif Holmberg]

1924 120"WB   has 32" x 4"tires =24" and 128" WB has 32"x 4,5"tires=23"

1925  Master has 32"x 5.77" tires =21" Option tires are 6.00" x 22".

The serial number tells it`s a 1925,and the frame with the tube between the rails  tells it`s a Master, and almost nothing will fit on a Standard model.

Leif in Sweden.

Edited November 5, 2017 by Leif Holmberg (see edit history)