Guest DanielmeguelT Posted October 19, 2017 Posted October 19, 2017 I have a Chrysler name tag with a manufactured curve and I would like to straighten it flat. My question is how can I do it without meltening it down to a fishing sinker.
keiser31 Posted October 19, 2017 Posted October 19, 2017 (edited) Got a photo of it so we can see what exactly you are working with? Edited October 19, 2017 by keiser31 (see edit history)
Spinneyhill Posted October 19, 2017 Posted October 19, 2017 Pot metal (die cast) softens with heat. At c. 175oC it melts suddenly. Clamp it to something, e.g. piece of flat steel, LIGHTLY. Pour boiling water over it and tighten the clamps A LITTLE immediately. Repeat until happy. Wait a day or two and repeat if it is not flat. You may need to use some shims to get it perfect. You can also use a heat gun, but be careful with the temperature. If it is aluminium and not die cast, this does not apply.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now