Bob Zetnick Posted September 5, 2017 Share Posted September 5, 2017 My headlight is loose on my '24...seems like an easy question, but have only had the car a few months and don't want to break anything. I don't see an exterior bolt to tighten the headlight on the vertical mounting and wondered if I have to get into the headlight shell. If so, there are no bolts / screws mounting headlight rim / lense to shell....does the rim just pop off? Thanks. Link to comment Share on other sites More sharing options...
keiser31 Posted September 5, 2017 Share Posted September 5, 2017 I believe that you CAREFULLY push in and turn CCW to get the lens and bezel off. Link to comment Share on other sites More sharing options...
Spinneyhill Posted September 5, 2017 Share Posted September 5, 2017 Put something below to catch it when you drop it! The glass is not easy to replace these days. Link to comment Share on other sites More sharing options...
JayG Posted September 5, 2017 Share Posted September 5, 2017 If you mean that it swivels then tighten the nut on the back of the rod that connects the 2 headlights. By tightening that you clamp the headlight in place on the stand. Link to comment Share on other sites More sharing options...
Bob Zetnick Posted September 5, 2017 Author Share Posted September 5, 2017 Thank you all! Didn't know tightening that rod did anything for the headlight and didn't know that bezel was threaded! Also, I'll make sure the lens has a nice pillow in a box below it in case it decides to drop!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now