hddennis Posted July 20, 2017 Share Posted July 20, 2017 Does anyone have a pair of splash apron grease covers or can they supply dimensions so they can be reproduced? Howard Dennis Link to comment Share on other sites More sharing options...
mrcvs Posted July 23, 2017 Share Posted July 23, 2017 Howard, Where did you obtain the photograph as the source of the photograph should be able to oblige. Because I don't know how to measure something with irregular dimensions. But, if we can figure out how to measure, and reproduce accurately, we can duplicate. I have one to provide as a template but would like to accurately duplicate because one is missing. Link to comment Share on other sites More sharing options...
hddennis Posted July 23, 2017 Author Share Posted July 23, 2017 My pictures were pulled off the internet from an unknown source long ago. It seems you have the only actual example so the ball is in your court. I don't have any sources for someone who could reproduce these but always thought if accurate measurements were obtained maybe a hardwood mold could be created that sheet metal could be beaten into? Just a thought and am certainly open to any suggestions. I'm betting that you and I are not the only ones needing these. Howard Dennis Link to comment Share on other sites More sharing options...
mrcvs Posted August 13, 2017 Share Posted August 13, 2017 Howard, Here are some photographs with a tape measure. Link to comment Share on other sites More sharing options...
hddennis Posted August 13, 2017 Author Share Posted August 13, 2017 Thanks, I'll add these to my files, appreciate the help. Howard Dennis Link to comment Share on other sites More sharing options...
mrcvs Posted August 13, 2017 Share Posted August 13, 2017 We're they helpful? Don't know how to depict a 3-D image that is curved, etc. Link to comment Share on other sites More sharing options...
hddennis Posted August 13, 2017 Author Share Posted August 13, 2017 More information than I had before. Waiting for a reply from another owner who said he had made copies for his and might be able to help me out. Howard Dennis Link to comment Share on other sites More sharing options...
hddennis Posted July 4, 2019 Author Share Posted July 4, 2019 On 8/13/2017 at 1:52 PM, hddennis said: More information than I had before. Waiting for a reply from another owner who said he had made copies for his and might be able to help me out. Howard Dennis Just realized that the owner who contacted me privately about reproducing these never got back to me and try as I might I can't find the original contact information. Please contact me again or respond to this post as these parts are still needed. Howard Dennis Link to comment Share on other sites More sharing options...
hddennis Posted November 27, 2019 Author Share Posted November 27, 2019 Still looking for a way to reproduce these or information on the fellow who sent me a private message saying he had made some and might be able to help? Howard Dennis Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now