captndan Posted July 6, 2017 Posted July 6, 2017 I need a throw out bearing for a 1926 Chrysler model 58. Nobody seems to have one or even know what it is. Please help. Thanks, Dan
ArticiferTom Posted July 7, 2017 Posted July 7, 2017 You should be able to get the number off existing . Look at through access clutch cover ,is on edge very small , If trouble locating, see Tayormade 's thread on Daphne . Then you can find a cross on SFK bearing site . 1
captndan Posted July 7, 2017 Author Posted July 7, 2017 1 hour ago, 28 Chrysler said: The Model 60 uses the same bearing. That helps. Do you have a part number? Thanks
28 Chrysler Posted July 7, 2017 Posted July 7, 2017 The clutch release bearing assembly is # 41208 and it looks like it was used in most of the early Chryslers starting with the Model Gs
captndan Posted July 8, 2017 Author Posted July 8, 2017 14 hours ago, 28 Chrysler said: The clutch release bearing assembly is # 41208 and it looks like it was used in most of the early Chryslers starting with the Model Gs I found a listing for 41208 as being for 1928 Plymouth. Crosses to Timken N441. Could this be the one for the 1926 Chrysler?
28 Chrysler Posted July 8, 2017 Posted July 8, 2017 More than likely. My book only lists Chryslers not Plymouth s. The part was used into the early 1930s. 1
hddennis Posted July 8, 2017 Posted July 8, 2017 Have you tried George Bachleda at Olcar Bearing Co. 135 James Creek Southern Pines, NC 28387 Ph: 910-693-3324 He's helped me with Maxwell bearing no one else had. Howard Dennis
captndan Posted July 11, 2017 Author Posted July 11, 2017 (edited) 21 hours ago, hddennis said: Did you call George? Howard Dennis Yes. He said he would research the bearing and call me back today (yesterday) or the day after. He called back within the hour. Nice guy to talk to and best of all he said he had two of the bearings. Also it would go in the mail today. This has probably ended a frustrating two week search. Thank You George! Edited July 11, 2017 by captndan (see edit history)
captndan Posted July 11, 2017 Author Posted July 11, 2017 2 hours ago, hddennis said: You're Welcome. Howard Dennis Yup you too Thanks Dennis for the lead.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now