90 Reatta ignition module connection

[Guest loupet]

Hope all are doing good out here. I need to either confirm connection or be corrected. On the ignition module connection I want ask if I`m connecting the module correctly. When looking at the wire side of the module, the 3 blue wires get connected on one side. Does it matter which side left or right? And, what is the order of the other 3 wires? (blue yellow green) Once the module and coil pack are connected, do the cylinder numbers on the coil pack need to match up with the wire connections of the module? Hope I explained this question correctly.  Thanks  Everyone

[89RedDarkGrey]

After all that discussion and advice, I thought you were installing the "AC Delco" type ignition? Why are you bothering with a new Magnavox setup? To keep it "original"?

 

To answer your question- please refer to this photo. All 3 chained blue wires go on one side, then blue, green, yellow on the other. I originally purchased a new Magnavox setup, then I learned about the benefits of the AC Delco type- and purchased all new components. There is a drastic improvement with ignition now.

 

[Guest loupet]

Yeah, 89RDG. Trying to keep her original. Thanks for the photo.

[89RedDarkGrey]

To answer plug wire orientation question- please refer to this photo:

 

Edited April 29, 2017 by 89RedDarkGrey (see edit history)

[Guest loupet]

Thanks again RDG.