wild bill Posted April 11, 2017 Share Posted April 11, 2017 I believe it takes 2 bushings, but have seen no pictures and its not in the service manual. Does It matter which way the bushing goes on? Link to comment Share on other sites More sharing options...
marty14 Posted April 11, 2017 Share Posted April 11, 2017 WINDSHIELD WIPER SYSTEM Q BODY Figure 23D-800 ITEM PART NUMBER QTY BODY MODEL DESCRIPTION WINDSHIELD WIPER SYSTEM Q BODY 1 BLADE, Wiper 03799875 2 w/o Dual Washer Nozzle 04389350 2 w/Dual Washer Nozzle 2 REFILL, Wiper Blade 03799335 2 w/o Dual Washer Nozzle 04389351 2 w/Dual Washer Nozzle 3 ARM, Wiper 04389366 2 w/o Nozzle 04334702 2 w/Nozzle 04389366 2 w/Dual Washer Nozzle 4 04467330 1 PIVOT, Wiper, Right 04467331 1 PIVOT, Wiper, Left 5 06031754 4 SCREW 6 04464506 1 COVER, Wiper Motor 04464497 1 SEAL, Cover 7 06031951 2 SCREW 8 06500502 2 NUT 9 03799595 1 LINK, Wiper, Right 10 03799600 1 LINK, Wiper, Left 11 03799089 2 BUSHING, Wiper Link 12 05211015 1 BUSHING, Wiper Link 13 06501154 1 SCREW 14 04389132 1 MOTOR, Wiper 15 04339452 1 GROMMET and SPACER PACKAGE, Motor 16 04339448 1 BRACKET, Motor Mtg. 17 AR BOLT (DNS) 18 04311855 1 SUPPRESSOR, Motor Radio Noise 19 03799597 1 CRANK and PIN, Drive 20 06031096 1 NUT, Drive Crank 21 04503104 1 CONTROL, Intermittent Wipe 22 04312004 1 BRACKET, Intermittent Wipe Control 23 05256076 1 REINFORCEMENT, Motor Mtg. Link to comment Share on other sites More sharing options...
wild bill Posted April 11, 2017 Author Share Posted April 11, 2017 Thanks marty14 Link to comment Share on other sites More sharing options...
Reaper1 Posted April 11, 2017 Share Posted April 11, 2017 The wiper bushing repair kit that is typically kept in stock in most parts stores' "HELP!" section do work. To do the center bushing on the motor that goes through both arms you have to drill through it. It's been a little while since I've rebuilt one, but for some reason I'm remembering I had to buy 2 of those kits to complete the job. There is/was a specific kit (or the OEM parts) as well, just not as "common". Link to comment Share on other sites More sharing options...
Bill Reichert Posted April 11, 2017 Share Posted April 11, 2017 I think the center bushing is still available at Chrysler. Link to comment Share on other sites More sharing options...
wild bill Posted April 11, 2017 Author Share Posted April 11, 2017 the Chrysler dealer I called in Denver didn't have them. All bushings Discontinued for this car. Nothing on a Daytona or Lebaron either hoping it might fit. Link to comment Share on other sites More sharing options...
wild bill Posted April 11, 2017 Author Share Posted April 11, 2017 I got some NAPA chrylser bushings, part no. 600-5582, 2 per pack. they are round with no cap. not sure how they stay on the wiper motor arm? And looks like they would need to be drilled to go all the way on the wiper motor arm. Link to comment Share on other sites More sharing options...
wild bill Posted April 12, 2017 Author Share Posted April 12, 2017 (edited) wiper motor bushing question. Looking up the mopar number it is a round bushing, not a cap, okay got that. Queston, do both wiper arms fit on this one bushing? Does one arm go on a cap bushing on the end to hold the other one on? I can see that one bushing might need to be drilled out larger to go on. But what in the world holds this wiper motor bushing on also? Hours of online research got nowhere. I could take the 89 apart but then it might be different or spend hours at a pick and pull looking for something similar. If anyone had a picture of that motor bushing with the arms on it that would be great also. Thanks Edited April 12, 2017 by wild bill (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now