Sign in to follow this  
Anselcop

Water pump replacement

Recommended Posts

I'm in the process of replacing the water pump on my 1949 with a straight 6.  The water pump came with a new plate that has a raised boss area around one of the bolt holes.  I have a full gasket that goes between the pump and the plate and a smaller half gasket that goes between the block and the new pump. So to make sure I understand what the raised boss around the bolts hole is for, I'm assuming since the gasket between the water pump and the block only makes contact with half of the surface the raised boss will make up the thickness of the gasket since there is no gasket around the raised boss bolt hole?  Hopefully I don't confuse anybody...

 

Dan

Edited by Anselcop (see edit history)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this