Jump to content

Buick Model F Splitdorf Coil Box Modification


Mark Shaw

Recommended Posts

Buick Model F Splitdorf Coil Box Modification

     My Model F came with two cut down plastic Model T coils with wires & bolts soldered to the side & bottom connections.  I had nothing but trouble with them on my first 1 &2 cylinder tour last summer, & I wanted to be able to just swap coils if I have ignition problems.  The original Model F Splitdorf coil box takes specially made coils available in Snyder’s Catalog at $465 each and in Lang’s catalog for $546 each.  Call me cheap, but I cannot see paying so much for trembler coils when used Model T coils are under $20 each.  So my challenge was to modify the coil box so Model T coils can be swapped out when one goes bad.

     I had to sand the narrow end of each T coil (only about 1/16” from each one) to make them fit back to back in the box.  The wood was a bit warped and sanding them with my belt sander evened them out and removed just enough to make them fit snug.  I soldered the bottom battery connection bolts to flat “contact washers” that fit perfectly inside the recesses already in the box.  Using a ½” wood chisel, I made grooves on each side the box for the timer and spark plug contacts. I evenly cut four contact strips from the Bottom of an old Model T ignition box to install in the side grooves so only the spring contacts sit proud of the box ID.  I soldered wires to the backside of contact strips and used a wood burning tool to make channels for the wires from the contacts to the open space inside the front of the box which provided a wire run to the bottom of the box behind the ignition switch.  I then cut the wires to length and soldered contact bolts to the ends of side contact wires and installed them in the bottom of the box.   I used shortened nails to secure the contacts inside the grooves and epoxied the wires into the wire channels. 

     The completed coil box modification worked perfectly with all three Model T coils I have.  It may not be pretty inside the box, but none of it shows and the T coils provide excellent spark and will allow me to swap coils if needed.

Mark Shaw

Vancouver, WA USA

20161128_171241.jpg

20161128_160739.jpg

20161129_091415.jpg

Edited by Mark Shaw (see edit history)
  • Like 2
Link to comment
Share on other sites

Mark:

Great modification. Good thing that us car guys who do their own work have a healthy respect for money. Otherwise no one would attempt to do these modifications. I spent 2 hours last night re-working a new combination switch housing from BOB'S. If I was not having an issue with him exchanging a new wing nut for my 1925 Master. I would have sent the switch housing back I purchased from him as the quality was pretty bad. I had gotten a new housing from him 4 years ago for the 1925 Standard which I rebuilt. It was a much better casting although some modifications still need to be made. I believe his supplier made an RTV rubber mold of a good original. Making the new aluminum castings from this mold makes all dimensions smaller because of the metals shrinkage.The casting I just received has many gas holes and inclusions. It is just barely useable. Also one has to adapt the original micarta contact plate to fit.

 I just feel for those in the hobby who do not have the experience /skill or machinery to make those adaptations.

Link to comment
Share on other sites

Larry,

     I fully agree.  Those who are in the catalog parts business should share the responsibility for quality of the products they offer in their catalog.  A single hobbyist does not have as much sway as the catalog house that sells a significant quantity of the manufacturer's product.  Casting voids and dimensional differences in replicated parts should justify replacement by the supplier regardless of when the part was purchased.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...