Jump to content

Looking for help on my front springs for my 31DB


Joe Cozza
 Share

Recommended Posts

Hi All,

I was at car show the other day and I noticed my front springs on my 31 DH coupe were horizontal if not above the horizontal plane. The car was on level ground.

I pulled the springs off to see if they lost their normal curve. They didn't. At least I don't think so.

The distance from the shackle holes to the top of the spring measured 2" I couldn't find any info on what dims. the springs should. Mine measure 35 1/4" from hole to hole,1 3/4" wide with a total of 7 leaves. The part # is 322646 . My local spring company couldn't see any problem with them but he admitted doesn't have any info on the specs. for that spring. I guess what I'm asking is, does anybody have any info on these springs? again the # is 322646.

Thanks,

Joe C.

Link to comment
Share on other sites

Thanks to  John Keiser and Articifer Tom for pointing me in the right direction.

The club's site has a wealth of info on springs and I should have looked there first. My bad.

Anyway, the dimensions  on the chart are the same as what I measured.

Thanks again,

Joe C.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...