gfw2 Posted July 23, 2016 Share Posted July 23, 2016 (edited) Hi I'm trying to piece back together a 1930 model 68.I bought this years ago as a left over parts car and now it's time for me to put the body together .Only problem is it came without 90% of it's wood. If i can get some pictures of the complete sills with measurements (Inside and outside please) at front, rear and the cross sills . It would be a great help. Thanks George Edited July 24, 2016 by gfw2 (see edit history) Link to comment Share on other sites More sharing options...
gfw2 Posted July 24, 2016 Author Share Posted July 24, 2016 Measurements between the A pillars and B pillars and in front of the rear seat Left to right. Just trying to get the width correct. Thanks George Link to comment Share on other sites More sharing options...
michaelod Posted July 25, 2016 Share Posted July 25, 2016 George, I will try to get some pictures of the sills for you but there may not be much to see. Problem is when the body is on the car (as mine is now) the sills are mostly covered by the bodywork and the frame. About a year ago I had the body off the frame and at that time they were very visible and accessible. Now, not so much. Anyway I will assist where possible. Thanks, Link to comment Share on other sites More sharing options...
gfw2 Posted July 25, 2016 Author Share Posted July 25, 2016 Thanks That would be great. At this stage measurements are more important than the pictures. George Link to comment Share on other sites More sharing options...
michaelod Posted July 27, 2016 Share Posted July 27, 2016 George, I came across something that should be helpful to you. On the Yahoo group for 1930 Buick (I think you are a member) in the photos section there are some photos of templates for the wooden sills for a 1930 60 series Buick that you are looking for. I am not sure what model, but there should be a lot of similarities in any case. These were posted by group member "enrdog72" and are considerably better than anything that I could get for you. I will try to get what dimensions I can this coming weekend. Link to comment Share on other sites More sharing options...
gfw2 Posted July 29, 2016 Author Share Posted July 29, 2016 (edited) Thanks Michael I had forgotten about those pictures. I'll go back and look. Thanks again for getting the measurements. George I'm starting to put together a list of chassis parts,brake parts and extra rims that i have and will be parting with also I'm also looking for a front bumper for my 30 and have 28-29 bumpers that i dont need and will part with. George Edited July 29, 2016 by gfw2 (see edit history) Link to comment Share on other sites More sharing options...
gfw2 Posted August 7, 2016 Author Share Posted August 7, 2016 Hi Mike The pictures were still there, it took me a while to to get back in as i haven't been on that site for quite a while. If you are near your coupe any time soon and can get me the distance between the doors at the top and bottom, front and back that would be a great help. Let me know if you are missing any other parts for your restoration. I have been gathering extra parts for mine for the last seven years and i'm going to try and trade for some of the parts i need,. Thanks George Link to comment Share on other sites More sharing options...
michaelod Posted August 13, 2016 Share Posted August 13, 2016 (edited) On 8/7/2016 at 0:23 PM, gfw2 said: Hi Mike The pictures were still there, it took me a while to to get back in as i haven't been on that site for quite a while. If you are near your coupe any time soon and can get me the distance between the doors at the top and bottom, front and back that would be a great help. Let me know if you are missing any other parts for your restoration. I have been gathering extra parts for mine for the last seven years and i'm going to try and trade for some of the parts i need,. Thanks George George, I have some measurements for you on the Buick: At the Rear bottom of the doors, from one side of the car to the other, and the outermost edge of the metal, the distance is 52 1/2 inches. In the picture it looks like 52 1/4 but that is because the end of the tape is holding on to the higher edge. At the Front bottom of the doors, from one side of the car to the other, and the outermost edge of the metal, the distance is 43 1/4 inches. I need to know where exactly you want me to make the measurements at the top of the doors. I am attaching a picture of the back side of the top door opening. Note that the outermost portion of the metal in the photo is the edge of the driprail. Do you want the measurement from side to side on the outside of the driprail or somewhere else? Edited August 13, 2016 by michaelod (see edit history) Link to comment Share on other sites More sharing options...
gfw2 Posted August 14, 2016 Author Share Posted August 14, 2016 (edited) Hi Mike Inside to inside at the top of the B pillars right by where it meets the top wood cover (over the door) and if open the same at the top of the quarter panel behind the B pillar. Thanks George Edited August 14, 2016 by gfw2 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now