tomsupon1 Posted June 30, 2016 Share Posted June 30, 2016 Hello all. Does anyone out there have milars or patterns for the wood on a series 40 Buick. I am currently in the process of removing the interior and have found wood that will need to be replaced. Any assistance would be greatly appreciated. Link to comment Share on other sites More sharing options...
Mark Shaw Posted July 3, 2016 Share Posted July 3, 2016 (edited) Your best hope is to find someone doing this at the same time with good wood pieces you can copy. Otherwise, make careful drawings with dimensions so you can replicate the parts from your own car. You may need to spray or inject epoxy to stabilize soft wood parts before removing them for patterns. Edited July 3, 2016 by Mark Shaw (see edit history) Link to comment Share on other sites More sharing options...
tomsupon1 Posted July 3, 2016 Author Share Posted July 3, 2016 Thanks Mark. Any suggestions on the epoxy? Link to comment Share on other sites More sharing options...
Mark Shaw Posted July 5, 2016 Share Posted July 5, 2016 The West System Epoxy is commonly used on boats. Try a marine supply store. Link to comment Share on other sites More sharing options...
Terry Wiegand Posted July 10, 2016 Share Posted July 10, 2016 Go to the Jamestown Distributors website. They will have what you are needing. Terry Wiegand South Hutchinson, Kansas Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now