MochetVelo Posted May 29, 2016 Share Posted May 29, 2016 Could anyone give me the basic dimensions of the Mets interior horn? Mine is missing, but there is the tell-tale hole in the floor where the tube ran. Phil Link to comment Share on other sites More sharing options...
2as Posted June 1, 2016 Share Posted June 1, 2016 The horn is 17.5 in long and 3in at the wide end. Link to comment Share on other sites More sharing options...
2as Posted June 1, 2016 Share Posted June 1, 2016 Does anyone know if there is a pin in addition to woodrift key in the pitman arm? and cross shaft on a Metz 22. Link to comment Share on other sites More sharing options...
MochetVelo Posted June 2, 2016 Author Share Posted June 2, 2016 Thanks for the measurements, 2as. Phil Link to comment Share on other sites More sharing options...
Jerry Alexander Posted September 10, 2016 Share Posted September 10, 2016 Where do you find a horn for the Metz? Mine is a '15 and that is one of the items missing from it. Thanks for your help! Jerry Link to comment Share on other sites More sharing options...
MochetVelo Posted September 17, 2016 Author Share Posted September 17, 2016 I decided to install an exterior horn, as my car was drilled for the brackets. I'm not sure if it had one originally or not, but it looks nice. The closest thing I found to the interior, engine-compartment horn was an old tin fog horn. I fact, that may have been what Metz used since they were near Boston. You can find them on eBay. For example: http://www.ebay.com/itm/Antique-Brass-and-tin-fog-horn-/331945314861?hash=item4d497b8a2d:g:YV4AAOSwawpXt0ZH Phil 1 Link to comment Share on other sites More sharing options...
Sampson 35 Posted November 5, 2017 Share Posted November 5, 2017 Hi folks, I am going to pick up the flex tube, reed n bulb to build the horn. While we have basic measurements for horn, does anyone havdd more exact measuremrnts, Looking at pics appears to have 2 beads front horn, is front edge rolled or raw edge Possibly make roller to make a few of these, that will be waste time n money I kniiw it would be easier to fit external horn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now