Guest rick97dodge Posted March 15, 2016 Share Posted March 15, 2016 ok guys I started into my 38 project and my frame is bent. I put it up on my rack and pulled it back and it will come back now I am in search of the frame specs for that truck its a half ton any input would be greatly appreciated thanks. Link to comment Share on other sites More sharing options...
vtpete38 Posted March 15, 2016 Share Posted March 15, 2016 Hi & welcome.You can find the complete specs for your 1938 model RC Dodge Brothers half ton pickup in the "Frame, Springs and Shock Absorbers section of the factory shop manual. All the dimensions are there as well as a diagram and notes on frame alignment. The manuals are pretty easy to find these days, especially on eBay. Here's a link to one: http://www.ebay.com/itm/1938-Dodge-Pickup-and-Truck-Shop-Manual-38-Repair-Service-base-book-for-1939-/161958765903?hash=item25b57ea54f:g:OrwAAMXQySpRNn49&vxp=mtr Pete Link to comment Share on other sites More sharing options...
countrytravler Posted March 13 Share Posted March 13 On 3/15/2016 at 10:54 AM, Guest rick97dodge said: ok guys I started into my 38 project and my frame is bent. I put it up on my rack and pulled it back and it will come back now I am in search of the frame specs for that truck its a half ton any input would be greatly appreciated thanks. update Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now