Jump to content

Installation of fuel pump bushing!!


Recommended Posts

Hi need info on the installation of the fuel pump rod bushing on my V-12 flat head.<P>1- Does the weep" hole go up or down in the casting? The bushing I removed did not have a weep hole.<BR>2 Is it suppose to fit flush on the Cam bearing oil hole? or is there a tolerance required for the bushing depth installation?<P>Bill Uhouse<BR>Pahrump nevada <P> confused.gif" border="0

Link to post
Share on other sites

Weephole goes down, the best thing is build a driver to install this bushing.<BR>Bushing should be installed about 0.30 from the bottom of cam-bearing housing.

Link to post
Share on other sites

Thanks WA for the info on the instalation of the bushing, I did make up a special tool for it's installation to keep it straight.<BR>I'm using a dental mirror to make sure I don't contact the cam bearing. It's odd that lincoln does not provide more info, except for maintaing a 7/8ths inch height from the top of the valve gallery.<P>Bill Uhouse

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...