g-g-g0

1957 Buick Special Restomod Project

Recommended Posts

Just to wrap up the rear of the car for now, a new gas tank was required and it needed to be modified for the filler pipe and the internal fuel pump.

2013-11-01_16-24-27_222.jpg

2013-11-01_16-24-15_917.jpg

2013-11-01_16-24-10_327.jpg

  • Like 1

Share this post


Link to post
Share on other sites

What pump system did you end up using? Looks like a one way deal, PWM? I know I don't need to say anything because this is pro work being done here, but I remember my dad had to get a new tank when he was modding his 502 pickup. They didn't flush the tank after welding it up and it filled his injectors with slag.Oops lol. The truck is long gone, but the memories aren't.

 

Edit: Just saw the return inlet.

Edited by Beemon (see edit history)
  • Like 1

Share this post


Link to post
Share on other sites

Fuel pump is part of the FAST EFI system.

  • Like 1

Share this post


Link to post
Share on other sites

A bit of info on the wheels and tires. The fronts are 255/50ZR 17's and the rears are 295/45ZR 18's NITTO NT555 Extreme Performance. The wheels are Deltona Superior Series made by Colorado Customs. Nearly 12 inches of rubber on the ground at each rear wheel. Sure hope that 425 has enough in it to break them loose on occasion!!! Hub caps are one off designed for this car but won't be shown until the car is complete!!! Ya gotta stay tuned!!

20140604_122841.jpg

20140604_122847.jpg

20140609_085331.jpg

20140609_085400.jpg

  • Like 3

Share this post


Link to post
Share on other sites

Staying tuned!  

  • Like 2

Share this post


Link to post
Share on other sites

very cool!

the 425 will smoke the tires stock, with your dual quad injection you won't get left behind!

Edited by 54fins (see edit history)
  • Like 2

Share this post


Link to post
Share on other sites

Well, I think it is time to consider putting some seats in the car. This IS a BUICK so there was no other choice but to use BUICK components. I wanted bucket seats and some that were some what period correct. Sooooooooo, I decided that we would go with first generation Riviera seating, front and rear. Again mods were necessary for proper mounting and seat height. For the front seat I found a somewhat elusive power drivers seat mechanism that required a major cleaning.

2013-09-23_11-31-59_74.jpg

2013-12-05_14-14-51_118.jpg

2013-12-05_14-15-40_967.jpg

2013-12-17_14-35-32_850.jpg

2013-12-10_13-36-33_121.jpg

2013-12-10_13-36-50_989.jpg

  • Like 1

Share this post


Link to post
Share on other sites

So on to the rear seats. Again from a first generation Riviera but mods were necessary. Fillers had to be fabbed to fill the gaps between the seat back and the interior quarter, upper corners of the back rest were modified to blend in with other contour's, panel between trunk and rear compartment was filled. Also incorporated was an again elusive center "pop up" center arm rest.

20160216_132849.jpg

20160216_132826.jpg

20160301_113627.jpg

20160211_084540.jpg

20160209_085003.jpg

2014-01-22_16-21-12_66.jpg

2014-01-22_16-20-46_185.jpg

  • Like 3

Share this post


Link to post
Share on other sites

The package tray is an issue of it's own. The original '57 tray was pretty much flat and fit the contour of the rear glass in the car. With the installation of the 1st gen Riviera seats the package tray now needed to have a radius to fit down into the seats to the speaker grille and the outer ends of the seat back. The original Riviera trays were cardboard and we were not sure they would fit/fill the whole surface of the '57. Therefore it required fabbing one out of metal and creating the correct curvature to fit the new opening. I am especially thrilled as to how it turned out! Also had to make some provisions for speakers in the tray as I will certainly require some cool 50's tunes while cruising!! "Ya' Ain't Nothin' But A Hound Dawg!!!! LOL

20160301_131208.jpg

20160301_131218.jpg

20160301_131233.jpg

20160329_143944.jpg

20160329_144015.jpg

20160401_165113.jpg

  • Like 5

Share this post


Link to post
Share on other sites

Well it's been a few weeks since I updated the build so let's build a console!

20150303_142235.jpg

20150303_142245.jpg

20150304_085301.jpg

20150304_200104(2).jpg

20150305_131730.jpg

Share this post


Link to post
Share on other sites

More console build. All of the wiring and controls run through the console and fitted so that they can be unplugged and the console removed for any repair/diagnostic work required.

20150307_133840.jpg

20150326_211211.jpg

20150408_134542.jpg

20150408_134603.jpg

  • Like 3
  • Haha 1

Share this post


Link to post
Share on other sites

Well this concludes the build thread for now. Still lots of work to be done! Paint, upholstery, final assembly and then test drive and etc. The goal is to have the car ready to go so that it can make the drive to Allentown. It's going to be tight but we are all working to meet that goal. If it makes it's debut their, then I will continue this thread or start another one to show the final project. Hope to see you in Allentown!!!

 

Thanks to all that have followed and commented on this thread to date. I has been a long project but I believe the final product will be quite pleasing to the eye and a real enjoyment to drive.

 

Thanks again, especially to Verne and Shane for their interest and excitement to build this project. A job well done!!!

 

Gary

  • Like 4

Share this post


Link to post
Share on other sites

Cool build, and what's even cooler, is that some members are enjoying a MODIFIED Buick build, instead of picking on the fact it won't be ORIGINAL.

 

Dale in Indy 

 

 

 

 

 

 

 

 

  • Like 4

Share this post


Link to post
Share on other sites
12 minutes ago, smithbrother said:

Cool build, and what's even cooler, is that some members are enjoying a MODIFIED Buick build, instead of picking on the fact it won't be ORIGINAL.

 

Dale in Indy 

                                                      

12 minutes ago, smithbrother said:

    Agitator!:D

 

  Ben                                                                                 

 

 

                                    

 

 

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Dale

 

Please, NO scallops on this one!!!!

  • Like 2

Share this post


Link to post
Share on other sites

Love your choice of seats. I had planned on using same in my 54 Special custom that never got off the ground. After seeing all the work (and beautifully executed at that) it took to accomplish, it's probably a good thing I never got that far. 

 

That console is aewsome. And I hear you about the pop up center being elusive. And pricey when found

  • Like 1

Share this post


Link to post
Share on other sites

OK, no scallops, but  NO white tires, or SUN VISORS, no fuzzy dice, stuffed animals, fox tails, dual antennas, although a high school friend said his added 10 MPH top speed, 5 MPH per side, no lights below frame, no curb feelers, no vertical plastic door guards, no blue dots, no musical hours, no skirts, no spot lights, and a few I'm forgetting.

 

If it goes fast PROTEST, if it doesn't, CHROME it.

 

Dale in Indy 

  • Like 1

Share this post


Link to post
Share on other sites

No "GO FASTERS"!!! Had some of those a bunch of years ago! What ever it took to please the young ladies!

Share this post


Link to post
Share on other sites

As high schoolers we ALWAYS had a work bench on the back seat, a (BLANKET).  hehe  

 

Mothers called other mothers, said, don't let your daughter ride with that wild driver Dale Smith, one mother said, it's to late,nthey are out on a date now.....I never hurt anyone.  For sure!

 

Dale in Indy 

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, smithbrother said:

As high schoolers we ALWAYS had a work bench on the back seat, a (BLANKET).  hehe  

 

Mothers called other mothers, said, don't let your daughter ride with that wild driver Dale Smith, one mother said, it's to late,nthey are out on a date now.....I never hurt anyone.  For sure!

 

Dale in Indy 

My dad always told me to take the blanket out so you don't get the picnic pitch all over the back seat. Haha

 

Looking forward to seeing it complete, I want to see those custom hub caps!

Share this post


Link to post
Share on other sites

Well an update. Pretty bummed out today! Met with Verne and Shane yesterday and finally had to face reality. The car will not be completed in time for Allentown! To say the least I am really disappointed, but at this stage of the game it makes NO sense to start taking short cuts to speed up the completion. No more pictures for now but will do a spread after it rolls out of the shop for the final time. I think it will be awesome! Pictures will not do it justice rather will need to be seen to pick up on some of the detail and craftmanship. Oh well there is always NEXT YEAR! Hang with me guy's. It will get done!

 

Gary

  • Like 1

Share this post


Link to post
Share on other sites
On 5/21/2016 at 10:30 AM, g-g-g0 said:

Well an update. Pretty bummed out today! Met with Verne and Shane yesterday and finally had to face reality. The car will not be completed in time for Allentown! 

 

It's okay, Gary...  As long as it's done by October for our Kansas Buick show!;)

  • Like 2

Share this post


Link to post
Share on other sites

Well it has been just over 3 months since I have posted an up date but first of all, thank you to all that have shown an interest in this project!! Hard to believe that there has been nearly 2500 "views".

 

Really not a lot to show for the past three months. However the body has been sprayed inside as well as the underside with LizardSkin Ceramic Insulation. Really like the stuff. It seals everything plus gives sound and heat insulation. The trunk was sealed with Dynamat. So not the body is sealed and now in final prime. Body is ready to set on the frame this week and FINALLY some visible progress. Hated to miss Allentown but Good Lord willin' and the creeks don't rise I will make Milwaukee next year!!

 

Stay tuned. 

IMG_0819.JPG

IMG_0825.JPG

IMG_0824.JPG

IMG_0823.JPG

IMG_0820.JPG

  • Like 4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now