JoelsBuicks Posted January 21, 2016 Share Posted January 21, 2016 There is a 1928 on Craigslist: http://shreveport.craigslist.org/cto/5404343816.html. I called the guy and he doesn't know much at all about the car, not even a model or series. I admit that I don't know either. When I called he came way down on the listed price so I know it's negotiable. I'm interested in this car but you can see that it has lost its head and rear bumperand other parts I'm sure. So what is the model and how hard would a replacement engine be to source and what does a person really need to know before he drives 6 hours to go and look? Thanks Link to comment Share on other sites More sharing options...
Guest jpizza57111 Posted January 21, 2016 Share Posted January 21, 2016 looks like long wheel base ,128 series.if he dosn't have head buick club should be able to help Link to comment Share on other sites More sharing options...
ROD W Posted January 21, 2016 Share Posted January 21, 2016 Joel, I,m not an authority on 1928 year models, and my 70 Years of Buick book is packed away for moving. But it is a Master with the built in trunk rack, so it is the top of the range model for 1928. 1924 - 1927 had a 128" wheel base chassis/frame. I know they changed the chassis in 1928, wether they increased the wheelbase? It might have been increased to 129". I would ask the owner if the engine turns over and if it has been stored inside. It is always a worry when the head is removed, is there any rust in the cylinders. There is a lot of wood in these sedans, The condition of the wood is probably the biggest consideration. $5000 sounds a bit much to me. Link to comment Share on other sites More sharing options...
Pete Phillips Posted January 22, 2016 Share Posted January 22, 2016 Agree with everything that's been said so far. Big, top-of-the-line model. The condition of the wood in the doors, cowl, and door posts will determine whether the car is worth restoring or is just a parts car. Open each door, grab it at one of the outer corners, and shake it back and forth. If it wobbles, the wood is bad. Also note whether the doors drop down when they are opened or whether they stay level with the rest of the body. Link to comment Share on other sites More sharing options...
JoelsBuicks Posted January 22, 2016 Author Share Posted January 22, 2016 Thank you all for weighing in on this. My concerne is that this car might have an engine that was maybe a one or two year only that only appeared on a single model. Do you know if this is the case? I may have a lead on a '27 engine close to my house but I know nothing about it either. Also, what else should I look for that may be nearly impossible to find? A rear bumper perhaps? One thing is for certain, you could go and get this car and be upside down on it - even if it had a $5000 bill taped to it. But still I'm a sucker for them. I really see this at around $2K and therefore will probably not get it. As for the wood, I'm getting better and faster as I go through my '31. As long as this car has remnants of pattern wood left, I won't worry too much about that. Who knows, it may be sufficiently solid that I just have to fortify the joints. Thanks again, Joel Link to comment Share on other sites More sharing options...
Dave_B Posted January 23, 2016 Share Posted January 23, 2016 Joel, The car your looking at is a Master. They made a half dozen or more models and they sold well. The 27 is very similar to the 28 and a lot of parts are interchangeable. I think the 26 is similar too. You shouldn't have too much trouble finding the parts. Dave Link to comment Share on other sites More sharing options...
Leif Holmberg Posted January 23, 2016 Share Posted January 23, 2016 I don`t agree what Dave_B say.1928 are different from 1927, 1928 are a one year for Buick all models in my opinion. 1925-1927 models are more close to eachother.Leif in Sweden. Link to comment Share on other sites More sharing options...
Dave_B Posted January 23, 2016 Share Posted January 23, 2016 Leif is right in that there are many differences there are also many parts from 27 engines that fit 28. For example intake and exhaust manifolds, carbs, water pump and timing gears. I think the Master cylinder heads may exchange too. The bodies and chassis are different. I think the wheels and rims are the same. This is from experience and may not be what the parts books say. Dave Link to comment Share on other sites More sharing options...
JoelsBuicks Posted January 23, 2016 Author Share Posted January 23, 2016 Thanks again, it seems that the consensus is that parts are not unobtainable. I can deal with that.Appreciate the response,Joel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now