1927/8 Nash advanced 6 pitman arm WTB

[viv w]

Hi All, I'm still looking to buy a pitman arm approximately 10.5inches long to fit a sector shaft 1.375 inches diameter with 36 splines. This arm connects the steering box to the drag link on my 1927 Nash advanced 6. Any condition, LHD or RHD considered.

Please note that the pitman arm on Nash advanced 6 from 1925 up to 1928 will probably be the same, I will also consider a pitman arm with the 1.25 inch size as this can be machined to a bigger size.

 I have discovered that the steering column I have is most likely from a 1928, if anyone has a pitman arm with the correct size diameter and splines please contact me, even if your pitman arm is a different length, thanks

Thanks

Viv.

Edited April 11, 2016 by viv w
NEW INFORMATION (see edit history)