Jump to content

DA-6 Rear Fenders?


dneivandt
 Share

Recommended Posts

Thanks everyone-much appreciated.  Is the single mounting hole on the rear of the fender to in wheel well wall that same as the DA (the flap the hole is in is actually a separate piece of metal to the fender). Also there are two holes that bolt to the running board, is that correct for the DA?

Link to comment
Share on other sites

Not so fast. The fenders pictured are from a DA Phaeton, not a sedan. Check the parts book. Dodge made at least three different rear fenders. Dneivandt, the single mounting hole you refer to is the most obvious visual key to distinguishing a Phaeton fender from a sedan fender. There are actually several differences. Unfortunately, most of these are discovered when attempting to mount a mismatched fender/body combination.  You soon discover how looks can be deceiving. Ask me how I know.

Link to comment
Share on other sites

Thanks so much-a fairly rare fender then.  The other fender that my friend has is also a right rear but has quite a lot of rust in the inner edge.  As they are not DC-8 fenders my friend doesn't need them, if anybody needs them or knows of somebody who does please let me know

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...