47clubcoup Posted September 4, 2015 Share Posted September 4, 2015 im mike n iv got a 47 lincoln club coupe zephyr. i broke the distributor cap as i thought it would just pull off.oops forgot to look at the picture.the ring needed to come off first.now im trying to take off the distributor plate.iv lightly tried to push it out with a rag n screw driver , it seems stuck.nothing in the picture keeping it in.didn't see any clips or rings.should i push harder or did i over look something?you'r wisdom is needed . thank you's. Link to comment Share on other sites More sharing options...
peecher Posted September 4, 2015 Share Posted September 4, 2015 Many times the terminal plate will stick pretty firmly in the distributor housing. What I'll do is remove the coil to gain access to the inner side of the terminal plate. using a wooden dowel or something similar carefully tap it loose using a small hammer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now