Jump to content

1928-1938 Dodge Brothers Emblems Open to Serious Offers


30dodgedd6
 Share

Recommended Posts

Some Still Available Open to serious offers Thank you  RESTORED EMBLEMS

 

Wanted "left" Head light Lens Cocoran Brown CO  1933-34 Dodge.

Be Careful with your parts Guys!  Fed Ex Broke it in shipping. How they could break a bubble wrapped double boxed All marked in Red Fragile is a lack of care for our hard to find parts

 
1. 1930 Dodge Brothers Smaller Nickel Winged Circle Center- Restored                                $295.00
2.  HOLDING 1931-34 Dodge Radiator Cap Ram Hood Ornament Used one Horn Chipped                     $295.00
3. SOLD SOLD SOLD 1935 Horn Button - Used                                                                                                       $110.00 sold
4. 1928-29 Dodge Truck "E" Series (Round Gold Feathered DB)    unrestored NOS?             $299.00
5. 1928-29 Dodge Truck "?" (Shiny Gold Feathered Dodge Brothers) Restored                      $299.00
6.  HOLDING 1931 Dodge DG8 and/or 1932 Dodge DL6 ( Nickel wings/gold Blue Center ) Restored       $299.00
7.  1930 DC8 ( DB 8 lt blue Lettering Gold Metal)NOS?                                                             $299.00
8. Holding 1929-30 "Dodge 6"  Nickel Wings Blue Restored No Mount                                                  $299.00
9. 1929-30 "Dodge 6"  Nickel Wings Blue Unrestored with Mount                                             $149.00
10. SOLD 1933 35 Dodge Brothers Truck/ 33 Car Grill Shell Gold Wings Medium Size Restored with Glass Cracks offset stud needs repair. Was restored then glass chipped                                                                                                        $225.00
11. SOLD SOLD SOLD 1934 Dodge Brothers Car Grill Shell Gold Wings Medium Size Restored                                         $355.00  sold
12. SOLD 1935 Dodge Brothers Car Grill Shell Gold Wings Medium Size Restored                            $335.00
*** These three 33,34,35 are the same stamp except how they are stamped/molded to the grill shell.
13. SOLD 1935-38 Trunk Lid Emblem Long Wings Restored     NOS?                                                       $299.00
14. SOLD SOLD SOLD 1935-38 Trunk Lid Emblem Long Wing restored                                                                                   $299.00  sold
15. SOLD SOLD SOLD 1937-? Dodge Brothers Grill Shell? Car Restored Smaller Winged Thin                                               $345.00  sold
16. SOLD SOLD SOLD 1936-? Dodge Brothers USA Grill Shell Says "37 TR" Truck? Car Thickest of 3 smalls                        $325.00 sold
17. SOLD1936-? Dodge Brothers Grill winged Emblem                                                                         $299.00
18. SOLD 1930 DD6 Business Coupe Dash and it has the copper center Trim Code Badge.                $350.00
19. SOLD SOLD SOLD 1933-35 Dodge Crank Hole Cover "6" Nice used needs a little more work to be perfect                        $205.00 sold
20. 1930- Cowl Trim Top piece only in between rare cowl lights will need resto                           $79.00
21 License Plate Topper Dodge Brothers Dealer I was told                                                           $35.00
 
 
 

DB!.JPG

photo 2.JPG

photo 3.JPG

photo 4.JPG

Edited by 30dodgedd6 (see edit history)
Link to comment
Share on other sites

Here some of the others! There is the 33 winged which is chipped but the 34 and 35 are restored all have been restored with Glass not Resin! There are two long 37's one is restored and one is original but nearly perfect as an original not pictured. The smaller winged have 36 , 37 , 38 on them

post-153902-0-87265500-1441371307_thumb.

post-153902-0-32273400-1441371325_thumb.

post-153902-0-33432800-1441371345_thumb.

post-153902-0-92896500-1441371361_thumb.

post-153902-0-11724900-1441371377_thumb.

post-153902-0-77894800-1441371391_thumb.

post-153902-0-49399400-1441371554_thumb.

Link to comment
Share on other sites

Hello

 

I received these as part of a Dodge brothers emblem collection from 1930 - 1939 and I am not sure of the year and models these emblems were originally on. Thank you for your help! Two are professionally restored and two are not the 1st one says NOS on the back. Thank you Again

Ist one top row is a match to my 29 DB "E" series truck. Check my profile for photos.

Link to comment
Share on other sites

The bottom left hand 2 and the one in your hand: It appears that the larger 2 are the same?? They appear to be '33 DP . Also fit '33 HC 1/2 ton truck and '34/'35 KC 1/2 ton truck.(mine) The smaller of the 2 in the left hand photo is most likely off the spare tire in '33. I don't think the trucks had emblems on their spares but I could stand corrected.   

Edited by DodgeKCL (see edit history)
Link to comment
Share on other sites

The one in my hand is a 33 the other two are 34 and 35 each has a different curve to it so the fit the shell flush. They say on the back collector marked those. The ram I think is a 34 there is only a nut and the radiator part is gone.

The smaller winged ones has a number 36, 37,38 and the big wings are trunk emblems no years written.

I was told the round one by the ram is a 36 Horn button?

I have another it is a "Dodge 6" with chromed/Nickel wings with Blue Glass Not Pictured. I think that's a 28-29?

The only one left I am not certain of is the second picture Gold Dodge Bothers DB any ideas Truck is correct I haven't found a model or year picture example yet.

Thank you Everyone!

Link to comment
Share on other sites

Yes. The one in the first shot is the horn button cover plate for 1936. It should have three tabs on the back if it is nice. 

 

post-109645-0-25215400-1441598427_thumb.

 

The second photo emblem year I am not sure. It is not '36. Could be 1935? But the "USA" across the bottom is a sure indicator that this one is for "Export" vehicles only.

 

The big wings are from a trunk lid. Again, without measurements of the studs on the back, can't be sure of the year(s) but you are very close with '36 '37 '38.

 

Good luck!

Edited by 1936 D2 (see edit history)
Link to comment
Share on other sites

The "DG" is simply a model designation. It did not really stand for anything else. 1929 Started using the DA and DB model numbers and through the years went to DC, DD, DH, DG, DK, DL, DM, etc....

Link to comment
Share on other sites

I have decided to sell the emblem collection but I am not certain of there value considering most are restored and a few are not. So I am currently researching that now. I may provide a price list later.  I have been quoted $400-600 labor to restore a 33 Dodge emblem which I own.  I am considering very serious offers on all or individual emblems. I also can accept Pay Pal, Cashiers check or money order. I always pack well. track and insure all I sell. I can provide you better pictures and description of each. Just send me an email, call or Text which ever you prefer.

 

Thank you

Jerry Reinhardt

469-358-4233

jwreinhardt@Hotmail.com

Edited by 30dodgedd6 (see edit history)
Link to comment
Share on other sites

Most of these  are very hard to find especially as group, restored or NOS. I have been told it may cost you as much as $300 to restore one emblem.  I have also been quoted between $400 - $600 for a restoration. I would prefer to sell these as a collective group. However I may consider separation if their is enough individual interest! I would appreciate your best offer please. I can provide More detailed pictures at your request! Thank you

Most have been restored and some have not been.

List of what I believe to be the correct year and or application with help from you guys! Thank you again! 

1. 1930 Dodge Brothers Smaller Nickel Winged Circle Center Restored

2. 1931-34 Dodge Radiator Cap Ram Hood Ornament Used one Horn Chipped

3. 1935 Horn Button Used

4. 1928-29 Dodge Truck "E" Series (Gold Feathered Dodge Brothers )unrestored NOS

5. 1928-29 Dodge Truck "?" (Gold Feathered Dodge Brothers) Restored

6. 1931 Dodge DG8 and/or 1932 Dodge DL6 ( Nickel wings/gold Blue Center ) Restored

7. 1930 DC8 ( DB 8 lt blue Lettering Gold Metal)

8. 1929-30 "Dodge 6"  Nickel Wings Blue Restored No Mount  

9. 1929-30 "Dodge 6"  Nickel Wings Blue Unrestored with Mount

10. 1933 35 Dodge Brothers Truck/Car Grill Shell Gold Wings Medium Size Restored with Cracks

11. 1934 Dodge Brothers Car Grill Shell Gold Wings Medium Size Restored

12. 1935 Dodge Brothers Car Grill Shell Gold Wings Medium Size Restored

*** These three 33,34,35 are the same stamp except how they are stamped/molded to the grill shell.

13. 1935-38 Trunk Lid Emblem Long Wings Restored

14. 1935-38 Trunk Lid Emblem Long Wing NOS it Appears

15. 1937-? Dodge Brothers Grill Shell?Car Restored Smaller Winged Thin

16. 1937-? Dodge Brothers USA Grill Shell Says "37 TR" Truck I assume maybe Car Thickest of 3 smalls

17. 1937-? Dodge Brothers Grill winged Thin but longer.

18. 1930 DD6 Business Coupe Dash With center trim code badge

Edited by 30dodgedd6 (see edit history)
Link to comment
Share on other sites

I have added 1930 DD6 Dodge Business Coupe Dash with center trim code badge to the collection

 

ALL for sale as a collection! I may divide in October for sale individually. If you have a serious offer on them all or an individual then please go ahead and bring it. I am not easily offended the worst thing is I will counter your offer or say No.

 

Thank you !

Link to comment
Share on other sites

I have another it is a "Dodge 6" with chromed/Nickel wings with Blue Glass Not Pictured. I think that's a 28-29?

A "Dodge 6" with chromed/Nickel wings with Blue Glass"...Are you referring to your item labeled Photo 9 - which IS pictured ?  If so, I think you are correct, it is from a 1929-30 DA. I believe originally it was copper with the blue/black Cloisonne (see the beat up one on my car). So what you have pictured there is a highly unoriginal "hotrodded" version of a 1929-30 DA emblem.  Essentially this has been ruined and is virtually worthless. That said, actually I love it, you did some amazing work and any time you are ready to part with it, let me know.  (I hope you know I am kidding you about ruining it!) 

 

EDIT-  Sorry, I get it now. You actually have two 1929 DA badges: 1) Photo 9 restored (no mount) pictured and  2) "Photo 8" (not shown) of an unrestored badge with a mount. Can you show the unrestored one-front and back? 

 

On second thought, the one without mounts may not be worth much. Try mounting that to the radiator without the posts- tough action. (epoxy, maybe?). Better yet, try adding posts after the cloisonne is done. No way to solder new posts on now without ruining the chrome and all your fine work. This may be an item best suited to someone collecting badges rather than installing them on a car.

post-97473-0-56529100-1442605254_thumb.j

Edited by idrjoe_sandiego (see edit history)
Link to comment
Share on other sites

Nice!  I have only seen a nickel plated emblems never a copper emblem. My last 30 emblem off my car was nickel also. The Dodge six I have is used and one is restored without the retainer. I have seen emblems held on with double sided tape. I have had one on my jeep for 15 years and its tested tuff! I think solder would hold without affecting the nickel. I will leave that up to the future owner of these.

post-153902-0-33652100-1442777516_thumb.

post-153902-0-20307800-1442777531_thumb.

post-153902-0-12940100-1442777614_thumb.

post-153902-0-27712000-1442777627_thumb.

post-153902-0-35360600-1442777683_thumb.

post-153902-0-37333900-1442778034_thumb.

Edited by 30dodgedd6 (see edit history)
Link to comment
Share on other sites

A "Dodge 6" with chromed/Nickel wings with Blue Glass"...Are you referring to your item labeled Photo 9 - which IS pictured ?  If so, I think you are correct, it is from a 1929-30 DA. I believe originally it was copper with the blue/black Cloisonne (see the beat up one on my car). So what you have pictured there is a highly unoriginal "hotrodded" version of a 1929-30 DA emblem.  Essentially this has been ruined and is virtually worthless. That said, actually I love it, you did some amazing work and any time you are ready to part with it, let me know.  (I hope you know I am kidding you about ruining it!) 

 

EDIT-  Sorry, I get it now. You actually have two 1929 DA badges: 1) Photo 9 restored (no mount) pictured and  2) "Photo 8" (not shown) of an unrestored badge with a mount. Can you show the unrestored one-front and back? 

 

On second thought, the one without mounts may not be worth much. Try mounting that to the radiator without the posts- tough action. (epoxy, maybe?). Better yet, try adding posts after the cloisonne is done. No way to solder new posts on now without ruining the chrome and all your fine work. This may be an item best suited to someone collecting badges rather than installing them on a car.

I am pretty certain that the "Dodge 6" emblem that Dr. Joe refers to as originally being "copper" is supposed to be plated. All of the emblems were copper plated prior to the chrome plating and most have the chrome worn off down to the copper.

Edited by keiser31 (see edit history)
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...