Guest stevenm Posted June 23, 2015 Share Posted June 23, 2015 Hi I am building a 37 Plymouth pt50 rat rod truck I have installed 20 inch tires on the rear (not tubbed). I was trying to find rear fenders that were wide enough but still looked like they belonged to the truck..So I decided to bolt both rear fenders together to cover one wheel. I now need two more rear fenders for the other side...My question is what other year Plymouth truck and what year dodge trucks have the same fenders?......are fargo trucks the same? Where I live the vehicles need to be fendered.ThanksSteve Link to comment Share on other sites More sharing options...
CarlLaFong Posted June 23, 2015 Share Posted June 23, 2015 Rat Rod!?!?!? Link to comment Share on other sites More sharing options...
Beltfed Posted June 23, 2015 Share Posted June 23, 2015 I also am not a fan of 'rat rods'. Just a piece of advice. When you post on this forum for anything other than orginial, keep it 'plain Jane'. In other words, just ask for a source for the fenders. Before I turned away from the 'dark side' I was on a Packard forum and mentioned the ugly word streetrod. As the kid who put his hand on a hot stove eye said... Boy, I won't do that again! Link to comment Share on other sites More sharing options...
Bhigdog Posted June 23, 2015 Share Posted June 23, 2015 (edited) It sounds ghastly...........Bob Edited June 23, 2015 by Bhigdog (see edit history) Link to comment Share on other sites More sharing options...
28 Chrysler Posted June 23, 2015 Share Posted June 23, 2015 Cut up a 55 gallon drum or use 1/4 plywood. 1 Link to comment Share on other sites More sharing options...
Bhigdog Posted June 23, 2015 Share Posted June 23, 2015 Cut up a 55 gallon drum or use 1/4 plywood. And lots and lots of Bondo and rattle cans. I do think, however, that 55 gallon drums deserve a better fate........Bob 1 Link to comment Share on other sites More sharing options...
Larry W Posted June 23, 2015 Share Posted June 23, 2015 Use trailer fenders. Link to comment Share on other sites More sharing options...
JACK M Posted June 24, 2015 Share Posted June 24, 2015 Not this again. Link to comment Share on other sites More sharing options...
whtbaron Posted June 25, 2015 Share Posted June 25, 2015 He raises a good question though... did the Plymouth pickups share the same parts as the Dodge and Fargo models? I would think yes, but I recall seeing one with wheel covers (strange, but looked good).... I'm not sure if those were stock or modified pieces. Link to comment Share on other sites More sharing options...
countrytravler Posted June 26, 2015 Share Posted June 26, 2015 1936 to 38 Dodge front and rear fenders are the same as 37 and 38 Plymouth trucks. I would believe Fargo to be the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now