Jump to content

Installing K D Carburetor


Recommended Posts

From the attached photo, where does the choke cable install?  It appears that it is on the 'toggle' to the lower left?  If so, is it the upper hole or the lower hole in which the cable goes?  Also, does anyone know the thread and the diameter for screwing the gas line to the carburetor?


Edited by mrcvs (see edit history)
Link to comment
Share on other sites

If everything is correct on your carb, the choke wire goes on the bottom. I've seen carbs where the butterfly has come loose and been re-soldered in the wrong position so check yours operation. When the wire pulls the lever to the  horizontal the butterfly should be fully closing off the carb throat. The fuel line is 5/16th tubing. 


Howard Dennis

Link to comment
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...