Jump to content

prepare engine manifold for painting


Recommended Posts

Frank, just an idea.. I had my exhaust manifold for my `36 Buick and dual exhaust manifolds for a `41 Buick super engine I rebuilt, ceramic coated at a local powder coating business, they actually look like chrome and will hold up to the heat.. From my experience paint will eventually burn off... even the high heat paint.. Tom

Link to post
Share on other sites

Bead or sand blast, if you're going to paint it with high temp paint.  Just make sure you go back and clean all the grit out from INSIDE the manifold, just to keep everything tidy.

 

You could also very carefully wire brush it, a brass brush will eliminate a lot of surface corrosion.

 

What you DON'T want to do is try to "pretty it up", say, by taking a grinder to it to smooth it down or knock off an ear you don't like.  Due to repeated heating and cooling, a cast iron manifold can develop a surface tension, and bothering that surface tension can sometimes make a manifold do a Rice Crispy imitation (snap, crackle, and.....so forth).

Link to post
Share on other sites

My engine manifold on a 80 year old engine is rust color and I would like to prepare that for painting.

Any suggestions.

 

Intake or exhaust?  Iron or aluminum?  These answers will affect the proper process.  Assuming a cast iron intake:

 

1) Degrease thoroughly

2) Sandblast.  Do not touch the blasted intake with bare hands, as this will transfer skin oils to the metal.

3) Blow off any residual sand/dust with compressed air,  Some will heat an intake at this point to remove any residual oil or gasoline residue.

4) Wipe down with lacquer thinner using a lint-free rag

5) Prep and paint using your choice of engine enamel and that manufacturer's prep and primer recommendations.

Link to post
Share on other sites

August of 2008, I had the intake & exhaust manifolds coated using their power coating process called "Armor Coating".

The exhaust has faded a little as shown in the the photo but the intake is as originally delivered.

I have driven the car 8,500 miles in the last 7 years.

 

Aesthers Finishes Inc

1502 S Main St

Piqua, Ohio

(937) 778-8860

 

http://www.afipowder.com/powder-coating-2/

post-85269-0-20384200-1433703050_thumb.j

Edited by huptoy (see edit history)
Link to post
Share on other sites

For cast iron exhaust manifolds, I have had good results using Eastwood's gray cast iron paint. Thoroughtly clean and apply per directions. The gray finish looks like fresh cast iron. It is a durable finish and actually looks better with age.

 

(o{}o)

Link to post
Share on other sites

Something that I used for other parts is the electrolysis, I'm thinking that will be a good way to clean the interior and revert any corrosion in those area that are hard to reach with conventional methods (a brush or sandblasting)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...