Jump to content

39 Stop Light Switch


Recommended Posts

My stop light switch quits working every three years or so.  I install a new one and it works fine for a few years than stops working and then the cycle continues.   I think I once saw a post that stated that the failure had to do with the switch not compatible with modern brake fluids.  Is this true or did i just dream it? 

 

Thanks

Link to post
Share on other sites

Thats sad..

I think the cheap china "quality" of all the switches are the problem..

try to get another brand also with another on/off range or connectors on it , Mainly the thread is the same.

My switch i have changed 5 years ago (Standard ) an it works fine with DOT 5 Silicone fluid.

Maybe you have too much power on the switch? thatd can be a reason too.

You have DOT 4in your lines ?

Dont do that, use DOT 3 because of the agressive additives in the DOT4.

Link to post
Share on other sites

Hi,

 

My experience with hydraulic stoplight switches in the 40 LaSalle was that replacing the switch was an annual event until I flushed out the silicone brake fluid and installed DOT 3 fluid.  I had gone so far as to install and idiot light in the dash to indicate that the brake light wires were energized.  I now use DOT 3 in all the cars, and the brakes get flushed every other year.  I have not replaced a swich since I started that practice.

 

The discussion of pro-silicone/anti-silicone rages on every year.  I suspect the questions over the Kennedy assassination, President Obama's birth certificate, and the home planet(s) of UFOs will be resolved before the brake fluid debate is ended.

 

--Tom

Link to post
Share on other sites

I have restored a couple of cars with hydraulic brakes (one my '38 Roadmaster). I replaced all rubber parts and stoplight switches and converted them to silicone fluid. The ;38 was done 25+ years ago and I have not had a bit of problems with the stoplight switch or anything else.

The switch failure being attributed to the silicone fluid (which is pretty innert) is surprising, especially since DOT 3 is such an aggressive paint stripper.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...