Jump to content

Starter button removal 46lincolnsedan


Recommended Posts

My starter button under the dash seems to be shorting out and nothing happens or a short click and then nothing. I disconnected it at the relay and then pressed the button on the relay and it started. How to I get at the push button under on the dash to replace it. Thanks

Link to post
Share on other sites

All the starter button does is supply a ground to the pick circuit of the solenoid. Try grounding the center terminal of the starter solenoid, you starter should turn over the engine. If that does not work, you will have to replace the solenoid. If it works, check under the instrument panel to make sure that the wire is attached to the starter button. The starter button should have one or two flat springs holding in place. Compress the springs from the back of the instrument panel and push the switch out.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...