beerczar1976 Posted April 1, 2015 Share Posted April 1, 2015 Hey everyone. Got my fuel pump re-built by Then & Now in Weymouth, MA. Insanely fast and excellent service. Came back with a bag of goodies (all the crap that they pulled out of the original) to show that they just didn't due a cursory cleaning and re-paint. Anyway, next steps will be to drop and clean my tank (may replace the fuel sender at the same time) as well as to install a new pre-bent fuel line from Inline Tube.Now here's my question, I've noticed on a few prior posts that it seems many folks have had to cut their new one piece line into a couple smaller pieces to get it back on the frame when the body is in place. Please tell me there's an easier way... The pre-bent one-piece line was pretty cheap, I think the shipping charge was almost as much as the line, but I'm hoping that I don't now have to hack up a brand new line to get it in place. A few others noted to try to raise the body off the frame just enough to squeeze the line thru...Can I just loosen the body mount bolts near the tight spots, or am I looking at loosening every single mount on both sides of the car? I'm hoping that buying a new fuel line didn't turn out to be a project that I can't really handle. Thoughts? Link to comment Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!Register a new account
Already have an account? Sign in here.Sign In Now