DaveC6970 Posted March 21, 2015 Share Posted March 21, 2015 Hello again,First I want to thank everyone for the tips and advice on my water pump/timing chain replacement last summer. The car is running great now!I do have a question for those of you with the first gen Turbine Wheel Covers. Do you have a preferred method for removing the spinner caps? My 63 has these and while I've done a lot of work on the car since I bought her, I've never had the wheels off. I'm hesitant to use the spinner "bars" for a grip, I would hate to snap one off. I did try to pry the cap from the base turbine piece at the mating groove. But I was using a nylon trim removal tool trying not to damage anything. My tool was too thick and would not fit deep enough in the groove. I must of removed a thousand Chevy rally caps in my life but usually you can get your finger tips behind the edge of them. Any advice would be appreciated. -Dave Link to comment Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!Register a new account
Already have an account? Sign in here.Sign In Now