tonyp Posted March 12, 2015 Share Posted March 12, 2015 pair of used 1934 1935 buick bent spoke wheels with hubcaps and trim rings.some dents/dings in trim rings,hubcaps aren't dented but finish is about a 7-8.rims are nice restorable rims repainted at some point but don't appear to have ever gotten all rusty.some surface rust inside the hubs and a few places where the paint is scraped but over all nice wheels.pick-up is welcome.$300.00 picked up.thanks,tony Link to comment Share on other sites More sharing options...
tonyp Posted March 12, 2015 Author Share Posted March 12, 2015 forgot to add the picture Link to comment Share on other sites More sharing options...
tonyp Posted March 12, 2015 Author Share Posted March 12, 2015 here's the bolt pattern- skipping a hole from backside of hole to center of hole= 5 5/8.skipping a hole from center of hole to center of hole=5 1/4.width of rim= 5 7/8.outside dia. of rim=17 1/2.inner hub outside dia.measured from the backside=10".weight=30 lbs each Link to comment Share on other sites More sharing options...
Marty Roth Posted March 12, 2015 Share Posted March 12, 2015 Do you know which Series 1934 - 1935 Buick these rims came from, or which they are for? I'm not certain that 40, 50, 60, and 90 Series all took the same rim ?Does anyone have that size information for these rims?This might help Tonyp find the right buyer Link to comment Share on other sites More sharing options...
1953mack Posted March 12, 2015 Share Posted March 12, 2015 here's the bolt pattern- skipping a hole from backside of hole to center of hole= 5 5/8.skipping a hole from center of hole to center of hole=5 1/4.width of rim= 5 7/8.outside dia. of rim=17 1/2.inner hub outside dia.measured from the backside=10".weight=30 lbs each- Assuming that your measurement of 5 7/8" is from outside flange to outside flange (not inside bead seat to inside bead seat), your wheel dimensions point to a 1934-1935 Buick 16x4.5 wheel from a 50 Series Buick. - 1934-1935 Buick 40-Series wheels were narrower @ 16x4.25.....60-90 Series were wider @ 16x5.0.- All three wheels were 5-bolt with a 5.5"-diameter bolt pattern.- Probably a Motor Wheel Corp. bent-spoke wheel.....not Kelsey-Hayes. There should be some stamped numbers and letters on the inside dropped portion of the center rim near the valve stem hole. What do they read?Al MalachowskiBCA #8965"500 Miles West of Flint" Link to comment Share on other sites More sharing options...
tonyp Posted March 13, 2015 Author Share Posted March 13, 2015 cleaned off that area on one rim about a half a foot from valve stem hole in either direction and didn't find any numbers or letters Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now