Bob Zetnick Posted June 8, 2015 Share Posted June 8, 2015 John, those are some nice clear crossections....my T rubber isn't quite as off center as that, but I'm sure would work.....I can check measurements in a couple of days. Link to comment Share on other sites More sharing options...
Bullfrog_eng Posted June 8, 2015 Share Posted June 8, 2015 Bob, that would be appreciated. The measurements were as accurate as I could be, but we are talking about some bits of rubber that are 80 odd years old and just a bit hard!!! I actually had to cut them with an angle grinder otherwise they just shattered. I am not absolutely sure they have not shrunk in that time, so a second opinion of some that has weathered in a different climate would not hurt.John Link to comment Share on other sites More sharing options...
Bob Zetnick Posted June 10, 2015 Share Posted June 10, 2015 John, here's the dimensions on my rubber door seals...the window seal is the same, but my top of door seal is different. Link to comment Share on other sites More sharing options...
Bullfrog_eng Posted June 11, 2015 Share Posted June 11, 2015 Thanks Bob.I guess yours may be a bit more difficult to hold under the steel panel screwed to the top of the door, will have a go and see what happens.John Link to comment Share on other sites More sharing options...
30dodge35 Posted June 11, 2015 Share Posted June 11, 2015 JohnThis is the sponge rubber I bought from Stelle Rubber Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now