Dynaflow Question - oil hoses for the cooler

[buick55]

i want to add a front oil cooler for the dynaflow trans.

so i need to know which fitting is the pressure and which the return side.

someone knows that, which number on the picture is which line?

[old-tank]

#2 pressure

#1 return

The original heat exchanger works fine unless you tow an Airsteam.

Another option that does not show is to mount a fan driven cooler under the car...details on request.

Willie

[bhambulldog]

#2 pressure

#1 return

The original heat exchanger works fine unless you tow an Airsteam.

Another option that does not show is to mount a fan driven cooler under the car...details on request.

Willie

Willie,

I'd like see, please.

[buick55]

thx willie! great...

yeah, i am sure it works fine but i want to add this part.

but also the option with the fan driven cooler is an good idea.

[old-tank]

I can't get to the underside of the car to measure now, but it would be one of these ( http://www.summitracing.com/search/part-type/fluid-coolers-with-fan?N=4294906761&SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=derale%20transmission ) in appropriate size mounted driver side inside lateral frame rail and between there ant the X-frame. May not work if manual master cylinder or if converted to dual exhaust.

Willie

[old-tank]

I used a Derale 15830 cooler mounted at the junction of the drivers side frame and the the X frame. It is mounted with the fins down and the motor above. The motor is wired to a toggle switch that is activated on an 'as needed' basis. The fan is wired to pull through the fins. No pictures at this time.

Willie

[bhambulldog]

thanks for that