Looking for parts 1924 Studebaker Special Six, steering wheel, gas tank, dbl flanged hub, cowl light

[Guest hank22]

I am still in the market for the following items that fit a 1924 Studebaker special six:

1. A wood steering wheel for a Studebaker special six, I have attached a picture of what my steering wheel curently looks like. It is 18" in diameter.

2. A rear double flanged hub (pictured)- either side is fine, only need one but would be willing to buy two if you have them available.

3. Gas tank for a 1924 special six.

4. Cowl lights, I have some parts to the right side but am missing the entire drivers side cowling light assembley.

If you happen to have any of these items, have seen one at a swap meet, or could point me in the direction I might be able to find one, it would be much appreciated.

Thanks again, John (530)781-3340

[Stude Light]

John,

I believe I have the cowl lights. Could you measure the distance between the front and rear face of the assembly (thickness of the cowl) and diameter of the hole?

Scott

smrdeza@lentel.com

[Guest hank22]

Hi Scott,

The hole is 2" diameter and the space detween the 2 peices is 5/8 of an inch out side to outside.

Oh, one other thing, I am looking for a Wagner 6v three brush generator as well.

Thanks,

John

Edited December 3, 2014 by hank22 (see edit history)

[Stude Light]

John,

You are in luck. I found 5 bodies and 3 lense assemblies for the cowl lights (assembly part number 200958). I also found a Wagner S-508 generator which is the correct one for your car. I'll work up some numbers and send you a PM.

Scott

smrdeza@lentel.com

[Guest mike1]

Scott,

Mike here in Sellersville PA. I have a 1923 Studebaker touring parts car with some parts you need. I have a cowl, the ight lenses you are looking for and a gas tank and hubs. Give me a call at 267-347-4026. Thanks Mike