Sign in to follow this  
southernal

23 dodge bros coupe.... rear end measurements

Recommended Posts

hi all...

Ive recently joined this site..

I am wondering if theres anyone around who would be happy help with some measurements for my coupe.

as per the photo , some errant soul has cut off the whole trunk/boot section .. I would like to rebuild it. parts here in new zealand are hard to find.( although I need to look a bit harder)

what I need is the length from the back of the door - opening. the height of the rear panel to the trunk lid . - above the fuel tank. and the width from left to right above the tank. the thickness or depth of the trunk lid

also if not to much bother, are the side panels curved -- from top curve down to the to frame or just flat sheet ?

thanks in advance .. it will me something to work with and not guess ....

Alex

post-102037-143142800984_thumb.jpg

Share this post


Link to post
Share on other sites

Just a word of encouragement. I have a 1924 coupe, which has a longer wheel base and other changes, so I can´t help much with your project. Just want to share a word of encouragement in your restoration project. These are wonderful old cars, and their owners are good folk. Merece la pena restorar y compartir con los demás su historia y aventuras con su viejo Dodge Brothers. ¡Animo! ¡Que viva Nueva Zelanda! Gracias por la foto.

Share this post


Link to post
Share on other sites
Just a word of encouragement. I have a 1924 coupe, which has a longer wheel base and other changes, so I can´t help much with your project. Just want to share a word of encouragement in your restoration project. These are wonderful old cars, and their owners are good folk. Merece la pena restorar y compartir con los demás su historia y aventuras con su viejo Dodge Brothers. ¡Animo! ¡Que viva Nueva Zelanda! Gracias por la foto.

Hey Roberto,

Thank you !!.. yes I am looking forward finishing this old coupe. I am folding new floor sections at work and have a little of the rust repairs (bottom of one door)

I would like to get the body measurements and panels finished before I start the frame

Gracias por tu aliento, me tomo algunas fotos que me han hecho progresos

un gran día

Alex

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this