wanted weston mott driveshaft 1910 to 1912 era

[foxy]

Im looking for a driveshaft housing to use on my 1912 krit project. Buick model 10, and possibly others, have the same casting that bolts to the rear axle housings. Will be happy if I can just obtain the part of the driveshaft housing with that casting attached.

Also looking for the internal brake band and linkages for one side of the diff. 9 and a half inch diameter.Will try and attach a photo soon. Any help appreciated.

[Mark Shaw]

Are you looking for the torque tube or the rear end?

[foxy]

Are you looking for the torque tube or the rear end?

Hi Mark, Looking for the torque tube. Any condition. Would be happy with just a cut off rear end of a torque tube.I also need a brake band and mechanisum that fits inside the brake drum on one side of the rear end.

[Guest got10carz]

Foxy, we need to talk. I have 1 1/2 KRIT cars.Steve

[foxy]

Foxy, we need to talk. I have 1 1/2 KRIT cars.Steve

Hi Steve, Im very keen to talk. Are you willing to sell individual parts? If so Ill send you a list.

Regards Brendon

[Guest got10carz]

Have a mostley complete 1913, a rolling 1911 chassis with driveline, and 1912 radiator with windshield. As you know 1911-1913 are basically the same car.I will not part, but would love to sell the pile. Steve