keen25

1933 - 1934 Plymouth reproduction parts?

Recommended Posts

I would like to hear from owners of 1933 and 1934 Plymouth and Dodge cars; what are the most needed parts that owners would like to see reproduced? Also, Would $400.00 be a good price for a set (2) of the side-mount bars which are made from 316 stainless steel and polished for such cars ? Thank you. Erick

Share this post


Link to post
Share on other sites

Front rubber floor mat for 1933 Plymouth is high on my list. Unfortunately the 1933 two door sedan used a different mat than other Plymouth models and I doubt that you'd want to tool up for the few known remaining survivors.

Share this post


Link to post
Share on other sites

Hi ply33, that is big one. In the 80's NC industries made a reproduction mat from my father's 33 pd 4-door sedan and the mat's rubber "tails" that run along side the door sill and side of the seat are not on the sedans but are on the coupe. I would like to find out what happened to the tooling NC Industries had or who made the mat. I was thinking about making a drawing of the mart and sending it to some of the people who remake rubber parts. But I would be asked how many would they sell. Erick

Share this post


Link to post
Share on other sites

Erick,

I bought the NC Industries mat back in the 90's. I do not know if they still sell it.

Thinking out loud the following parts are not easy to find:

For 33 PD

Door Handles including the locking style.

Door Handle escutcheon plates. Most originals are broken and cracked making them difficult to plate.

Rumble seat floor mat. I have not ever seen one, even originals.

Chris

Share this post


Link to post
Share on other sites

Almost forgot the tail light stands for 33 PD.

NC sells the one without the license plate bracket but are long out of stock on the ones with the license plate bracket.

I am wondering if the brackets for right and left are the same just the bracket is attached to driver side?

Share this post


Link to post
Share on other sites
Erick,

I bought the NC Industries mat back in the 90's. I do not know if they still sell it.

Thinking out loud the following parts are not easy to find:

For 33 PD

Door Handles including the locking style.

Door Handle escutcheon plates. Most originals are broken and cracked making them difficult to plate.

Rumble seat floor mat. I have not ever seen one, even originals.

Chris

That locking style handle could be one I'd be interested in.

I have some reproduction escutcheons that I think I got from N/C Industries. Might want to check if they have them. The repros I have are cast and the points don't dig in and work as well as the stamped originals. Also they are chrome plated instead of the proper nickel plate for interior brightwork.

Share this post


Link to post
Share on other sites
Hi ply33, that is big one. In the 80's NC industries made a reproduction mat from my father's 33 pd 4-door sedan and the mat's rubber "tails" that run along side the door sill and side of the seat are not on the sedans but are on the coupe. I would like to find out what happened to the tooling NC Industries had or who made the mat. I was thinking about making a drawing of the mart and sending it to some of the people who remake rubber parts. But I would be asked how many would they sell. Erick

I've got a drawing/sketch of the N/C Industries reproduction mat made for my by the previous 33 tech advisor for the Plymouth Club.

About 10 or 15 years ago I asked N/C Industries about making more floor mats. Apparently the tooling, while owned by N/C, was being stored at the rubber company. And the rubber company threw it out. At the time I talked with them they did not think there was enough market to cover the cost of new tooling.

For what it is worth, I've tossed up a table in the parts area on my web site showing the various part numbers for floor mats for '33 and '34 which shows which body types used a common mat. I did not put up the numbers for right hand drive, just the "normal ones" that would be used in cars in the US. That is at http://www.ply33.com/Parts/group23#23-20-08

Share this post


Link to post
Share on other sites
Would $400.00 be a good price for a set (2) of the side-mount bars which are made from 316 stainless steel and polished for such cars ? Thank you. Erick

Hi Erick, I am in the process of looking to making the bars myself as I haven't had any luck trying to locate them, perhaps you can send me photos, you have email address ref luggage rack grommets.

Thanks​

Share this post


Link to post
Share on other sites
Almost forgot the tail light stands for 33 PD.

NC sells the one without the license plate bracket but are long out of stock on the ones with the license plate bracket.

I am wondering if the brackets for right and left are the same just the bracket is attached to driver side?

Chris the stands are the same, what's different is the bucket fixing. Both have bucket fixings welded to them but of course one is round and the other is integral with the licence plate .

Share this post


Link to post
Share on other sites

I'm in the market for a set of front fenders and  radiator shell for a 

1933 Plymouth PD. Or any leed would be nice.   Thanks

 

Share this post


Link to post
Share on other sites

I have a friend restoring a 34 Plymouth PF convertible coupe. There appears to have been some sort of panel under the area where the top folds down just behind the seat. Do any of you have a picture of this piece? Its been chopped out and we have no idea how it looked. Also at the rear of the door bottom opening their appears to have been a structure of some type welded on the floor pan. Also cut out and missing. Any help appreciated. 

Share this post


Link to post
Share on other sites

These are reproduced parts I sell 33 34 dodge Plymouth door spring keepers and springs for head light bolts.may fir other years and makes. I also have Roof seal for 36 Dodge/Plymouth Steel top cars,

 

A948261E-6B6D-4715-966A-84FF9033DE1D.jpeg

B3954D3D-81AE-42BB-BA0F-EC2439FD5C9A.jpeg

Edited by knobless (see edit history)
  • Like 1

Share this post


Link to post
Share on other sites
On ‎3‎/‎10‎/‎2019 at 10:11 PM, Bikertrash said:

I'm in the market for a set of front fenders and  radiator shell for a 

1933 Plymouth PD. Or any leed would be nice.   Thanks

 

https://www.speedwaymotors.com/1934-Dodge-Plymouth-Fiberglass-Front-Fenders-Short-Wheelbase,1521.html

Share this post


Link to post
Share on other sites
22 hours ago, 3Eagles said:

I have a friend restoring a 34 Plymouth PF convertible coupe. There appears to have been some sort of panel under the area where the top folds down just behind the seat. Do any of you have a picture of this piece? Its been chopped out and we have no idea how it looked. Also at the rear of the door bottom opening their appears to have been a structure of some type welded on the floor pan. Also cut out and missing. Any help appreciated. 

Mine was the same way when I found it.  Had it fabricated based upon several pictures.  Here is one of them, will shoot you the rest when I get back to my other computer.  P.S.  If it is a 34 Plymouth convertible coupe, it is not a PF.  The convertible coupe was only available in the long wheelbase (114") PE model.

34peconvwindshield.jpg

Share this post


Link to post
Share on other sites

Hello,

 

I would love to find, or possibly have reproduced, the upper and lower stainless steel trim pieces that secure the stainless surrounds on my 1934 Plymouth grill(mine are missing).  I also would love to find a grill insert.  I am not a street rodder, so the billet aluminum inserts that are made will not work for me.  Any help would be greatly appreciated.

 

Thank you,

 

Jack H.

Share this post


Link to post
Share on other sites
On 12/10/2019 at 8:15 AM, classiccarjack said:

Hello,

 

I would love to find, or possibly have reproduced, the upper and lower stainless steel trim pieces that secure the stainless surrounds on my 1934 Plymouth grill(mine are missing).  I also would love to find a grill insert.  I am not a street rodder, so the billet aluminum inserts that are made will not work for me.  Any help would be greatly appreciated.

 

Thank you,

 

Jack H.

I have the upper piece, good luck finding the lower one.  Shoot me a PM, I'm in San Diego.  

  • Like 1

Share this post


Link to post
Share on other sites
57 minutes ago, Scott Bonesteel said:

I have the upper piece, good luck finding the lower one.  Shoot me a PM, I'm in San Diego.  

Thank you, I will send a PM now.

Share this post


Link to post
Share on other sites
On 12/12/2019 at 9:47 PM, Scott Bonesteel said:

I have the upper piece, good luck finding the lower one.  Shoot me a PM, I'm in San Diego.  

Hi Scott,. How do I get in touch with you?

Share this post


Link to post
Share on other sites
5 hours ago, classiccarjack said:

Hi Scott,. How do I get in touch with you?

On a web browser viewing this thread, put the mouse over Scott's name where he posted the "Shoot me a PM" response. A pop up will appear and one of the options will look like an envelop. Click on that and you can send him a Personal Message (PM).

Share this post


Link to post
Share on other sites
On 12/15/2019 at 8:44 AM, ply33 said:

On a web browser viewing this thread, put the mouse over Scott's name where he posted the "Shoot me a PM" response. A pop up will appear and one of the options will look like an envelop. Click on that and you can send him a Personal Message (PM).

Thank you Ply33, I did try that at first.  He did respond to my PM, I will call him tomorrow. 

 

Fortunately this is a easy forum to utilize.  It's very similar to a couple that I am a member of.  I do appreciate you reaching out to me to try to help me along.  Most people in other forums will leave a guy hanging...  LOL

Share this post


Link to post
Share on other sites
3 hours ago, Scott Bonesteel said:

We connected.  I was out of the loop working out of town.  SMB

Thank you Scott, I will try to call you tomorrow.

Share this post


Link to post
Share on other sites
On 12/16/2019 at 9:08 PM, Scott Bonesteel said:

We connected.  I was out of the loop working out of town.  SMB

Hi Scott,

 

Please check your PM.  I hope that you are doing well.

 

-Jack H.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now