nickg112 Posted February 14, 2014 Share Posted February 14, 2014 I have been looking for someone that sells carburetor linkage for 1941 Ford. There are three linkages that go from three cables from the firewall to the carburetor. They all are 6 to 10 inches long and have some type of a connector at the cable that comes out of the firewall. I believe that the linkage is different from any other year Ford. If someone has a 1941 Ford, I would love to talk to them. Or, if you know a supplier it is appreciated. Thank you Link to comment Share on other sites More sharing options...
nickg112 Posted February 17, 2014 Author Share Posted February 17, 2014 I have added photos to clarify. Looks like I need one short rod and some type of connector. Previous owner use a rubber hose as a connector. Does anyone have an idea if the 40 and 41 Ford is the same? Link to comment Share on other sites More sharing options...
Guest jack_a_eckert Posted February 19, 2014 Share Posted February 19, 2014 Go here and post the same. http://www.fordbarn.com/forum/forumdisplay.php?f=4Jack E/NJ Link to comment Share on other sites More sharing options...
motoringicons Posted February 19, 2014 Share Posted February 19, 2014 (edited) Dick Spadaro in New York, Yesteryear Ford in Mason, MI will all have the parts you need. Dick and Yesteryear are extremely knowledgable and they can tell you on the phone what you need as well. I believe 1940 and 1941 are the same. The correct rod for the hand throttle is two piece with a rubber connector. I believe the choke rod is the same. The foot throttle (accelerator) is a solid rod without a connector. Here are their websites:www.yesteryearfordparts.comwww.dickspadaro.com Edited February 19, 2014 by motoringicons (see edit history) Link to comment Share on other sites More sharing options...
nickg112 Posted February 20, 2014 Author Share Posted February 20, 2014 I will check out both of these sources. Thank you Link to comment Share on other sites More sharing options...
19tom40 Posted February 20, 2014 Share Posted February 20, 2014 Speedway Motors is a good source for multi cab linkage. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now