Guest lexingtonowner Posted August 30, 2013 Share Posted August 30, 2013 Car is 6 volt...is it positive to ground? Second problem: If you turn ignition switch on there is power to the coil but nothing from the coil to the points Link to comment Share on other sites More sharing options...
Guest cben09 Posted August 30, 2013 Share Posted August 30, 2013 Be sure the points are open when you test,,,If not easy to turn engine,,put a piece of paperlike a matchbook cover between the points,,If still no currant,,sounds like a wire broken in the coil primary winding,,Replace coil,,Oh yes,,disconnect wire at distribtor and test too,,just in case there is a piece of wire touching ground at the dist' body,,,We dont know if someone has played here beforeCheers,,Ben Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now