Jump to content

For Sale: 1934 Dodge Truck Grille and Shell Original


Guest Robert McNeil

Recommended Posts

Guest Robert McNeil

I have this Shell and Grille from a 1934 Dodge Truck, also fits 1933 and early 1935 Truck, For Sale: Shell is 43 inches tall, 22 inches wide at the bottom, has good mounting posts on bottom. Very solid, no rust issues, no surface pitting, but some black paint left and bare metal. Needs some repair at top filler hole, replace two or more 1/2 inch bars, straighten a few others, and smooth old welds at bottom where fatigue cracks start. Some of the mounting holes were braze reinforced years ago. post-64951-143142006519_thumb.jpgPrice is $325 plus shipping ($40?) Call me in Colorado 303 795 0203, or bbhmcneil@msn.com

post-64951-143142006488_thumb.jpg

post-64951-143142006505_thumb.jpg

Link to comment
Share on other sites

Guest DodgeKCL
post-31311-14314201139_thumb.jpg(I may be repeating myself as the site file manager kicked me out before I was finished.) The grille you have is for a larger Dodge truck possibly a 3/4 ton or larger. The '33/'34/'35 1/2 ton rad and grilles are off the '33 DP car. The 1st thing that gives it away is the lack of the connecting piece from the crank hole down to the bottom apron. The 1933 DP car and the 1933 to '35 1/2 ton Commercial Cars all shared the same front 'clip'. Edited by DodgeKCL (see edit history)
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...