Joseph44 Posted July 11, 2013 Share Posted July 11, 2013 On the 307ci 5.0 engine used in the 1983 buick prk ave on the intake manifold you have 2 vacuum fittings coming out of the intake 1 in the rear and 1 in front near the #1 spark plug, can those be taken out of the intake with an easyout? I have 1 bent and leaking air. Any help would be greatly appreciated!!! Link to comment Share on other sites More sharing options...
JohnD1956 Posted July 12, 2013 Share Posted July 12, 2013 Need pictures. Link to comment Share on other sites More sharing options...
Joseph44 Posted July 12, 2013 Author Share Posted July 12, 2013 Hi JohnD1956 If your asking me for pic's. I'm sorry I cannot But if saying you have pic's that would be good. I must remove one of my manifold vacuum fittings or replace the whole intake manifold what I want to know is can I drill or use an easy out to remove this fitting. Link to comment Share on other sites More sharing options...
JohnD1956 Posted July 13, 2013 Share Posted July 13, 2013 Hi Joseph, I was saying we'd need pictures of the fittings to make a valid recommendation. Link to comment Share on other sites More sharing options...
Joseph44 Posted July 14, 2013 Author Share Posted July 14, 2013 Thanks John1956 for your help very helpful I'll post what happens Thanks again John!!! Link to comment Share on other sites More sharing options...
JohnD1956 Posted July 14, 2013 Share Posted July 14, 2013 You are most welcome. Good luck! Link to comment Share on other sites More sharing options...
Joseph44 Posted July 17, 2013 Author Share Posted July 17, 2013 Thanks for your help John for your help easy out worked fitting came out like butter thanks again and have a great wk/nd!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now