Jump to content

326 Packard Door Hinge


Guest vintage honeycomb

Recommended Posts

Guest vintage honeycomb

Hello, can anyone help me with a left hand lower door hinge for my Packard 1926 326 phaeton/tourer. That is the drivers side in the US and passenger side in Australia.

The hinge I require is the lower, longer of the 2 hinges. The number stamped into the hinge, (which has a hole drilled through the number) is I think 104F and has 3 countersunk holes in each side.

Thank you

Greg in Brisbane, Australia

Link to comment
Share on other sites

  • 1 month later...
Guest Touer143
Hello, can anyone help me with a left hand lower door hinge for my Packard 1926 326 phaeton/tourer. That is the drivers side in the US and passenger side in Australia.

The hinge I require is the lower, longer of the 2 hinges. The number stamped into the hinge, (which has a hole drilled through the number) is I think 104F and has 3 countersunk holes in each side.

Thank you

Greg in Brisbane, Australia

Hi Greg, I assume you are talking about the rear door hinge. If it is a front door I have a spare. I have had a rear hinge cast. Regards Monty Adelaide

Link to comment
Share on other sites

Guest vintage honeycomb

Monty, that's interesting, I had not mentioned it being the rear door, well picked up. Yes it is the rear passenger door (in Australia), the fact you have had one cast I assume they are not plentiful.

Again thanks for your contact.

Greg.

Link to comment
Share on other sites

Guest Touer143
Monty, that's interesting, I had not mentioned it being the rear door, well picked up. Yes it is the rear passenger door (in Australia), the fact you have had one cast I assume they are not plentiful.

Again thanks for your contact.

Greg.

Hi Greg,

I still have the pattern for the hinge and can get one cast if you like as I'm getting some other bits done at the moment. I have quite a few parts for the 3rd series 6 including engine, radiator etc so let me know if you need anything else and I will see if I can help. I'm looking for a jump seat frame and a taillight bracket for my car (143 7 seat tourer) and they are the same on the first and second series 6 as well as the 8 so if you know of any bits in Queensland that would be great.

Regards Monty

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...