Jump to content

Recommended Posts

Posted

Hi everyone.

I was digging around in my boxes of stuff for my 34 Dodge and came across two ashtrays.

One is plain and the other ( which I do have the handle / knob for ) is exactly the same shape but has an almost lookalike little dodge emblem. The emblem is metal and there are two holes drilled into the ashtray where spring clips attach on the other side.

Does anyone know if these were both for 34's and one is just a bit more fancy than the other or are they for different years ?

Ian

post-44589-143141839647_thumb.jpg

Posted

The badge is "sort of" like the Dodge emblem but not quite. Could that one be an "after market" piece? That cover looks a bit newer or "less used" than the one on the right which may then be the original?

Posted

I have only seen the plain type on '34's. It seems from way back in my memory that there was a badge on a '35 or '36 model I seen once. You might take off the badge and see if there are any part numbers or identifying marks on it.

Posted

The emblem on the one ashtray plate looks to be mounted slightly crooked......may be an indication that someone added it later.

Posted
I have only seen the plain type on '34's. It seems from way back in my memory that there was a badge on a '35 or '36 model I seen once. You might take off the badge and see if there are any part numbers or identifying marks on it.

I have also seen this in the past but cannot remember much about it

Posted

The crooked mounting of the emblem may be my fault. I removed the retaining clips at the back then I took the photo which is probably why it looks crooked and it was loose.

I've got some more weird things down the track to post including an accessory that I have never seen before.

Ian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...