Jump to content

reatta


Guest reattasam

Recommended Posts

On the back side of the shifter knob is a staple. Pry that out with a flat blade screwdriver. Pull the knob straight up. Set aside. [Do not lose staple]. Rhe shifter plate is held in place by friction clips. Kift up with your finger tips, unplug shifter light and set aside. Open door to the ash tray and remove the two screws holding down the center console. The rest of the panel is held in place by friction clips. The console panel is two layers. The top metal panel is clipped together to the plastic backing panel. Be careful when you try to remove the panel that your finger tips are under the plastic panel.

You should now be able to remove the switches you need to swap them out.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...