davidyavidy Posted December 24, 2012 Share Posted December 24, 2012 :confused: Want to install aluminum mag wheels on a friend's '56. Unfortunately the axle flange is threaded for 9/16-18 lug bolts. I'd like to procure a step down stud with the 9/16-18 threads on one end and 1/2-20 threads on the other. Actual dimensions needed are 9/16-18 x 5/8 one end, 1/2-20 x 1.0 other end, and the unthreaded middle portion (i.e. shoulder, body, etc.) to be about 3/16" L. Total overall length of stud: 1 13/16". All dimensions +/- .030. I've checked with ARP Bolts, Fastenal, American Fastener, E-Bay Motors, and rockauto.com, to name a few and so far have come up empty. Also checked with a local machine shop who said they could make it, but declined due to liability fears. Any ideas/experiences? (Also suggested to the owner to just chrome plate the stock rims and install baby moons). Link to comment Share on other sites More sharing options...
JohnD1956 Posted December 28, 2012 Share Posted December 28, 2012 Would the machine shop enlarge the holes in the rims so you can just use the 9/16 bolts? Link to comment Share on other sites More sharing options...
davidyavidy Posted December 28, 2012 Author Share Posted December 28, 2012 The original lug bolts would be too short to reach the axle threads as the aluminum wheels are almost an inch thick. The other problem is the original lug bolts are tapered under the head just like a standard lug nut to mate with the tapered opening in the steel rim. The mag wheel requires a flat washer under the head of the mag style lug nut so the mag nut would also need to be flat at the bottom end of the hex. Modifying the mag wheel would also doom its usage to only axles made like those on the '56. By using the special studs as I've described, the Buick could be returned to stock in a matter of minutes and the mag wheels could be used on another vehicle. The idea is simple. Making it a reality is not, apparently. I'll keep hunting. Link to comment Share on other sites More sharing options...
Airy Cat Posted January 1, 2013 Share Posted January 1, 2013 Stockton Wheel Link to comment Share on other sites More sharing options...
60FlatTop Posted January 1, 2013 Share Posted January 1, 2013 I remember fighting for those '56 Buick wheel covers...... around 1962 and '63. I never got into painting the alternate squares red and white, but there is a full set in my garage in case I need them.Now, I am curious. Someone actually wants to take wheel covers like that OFF a '56 Buick? Sounds like something one of my friends would have talked me into. I can almost hear my Dad's voice now.Bernie Link to comment Share on other sites More sharing options...
davidyavidy Posted January 3, 2013 Author Share Posted January 3, 2013 Not on a permanent basis, just curious to see the look. That's why I don't want to modify either the axle or the aluminum wheels. Link to comment Share on other sites More sharing options...
Guest gunjeep444 Posted January 3, 2013 Share Posted January 3, 2013 Just photo shop them to see the look. Link to comment Share on other sites More sharing options...
rmartens Posted January 10, 2013 Share Posted January 10, 2013 I had the same challenge some 20 years ago. I bought grade 8 bolts of the larger diameter and thread, then took them to the local vocational school where they cut off the heads and turned down the narrower diameter and thread pitch needed. Said the hardened bolts needed 3 passes each on the thread cutting lathe. They worked wonderfully! I've since moved back to the original wheels and hubcaps. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now