Jump to content

help to identify air cooled cylinders


Guest jim king of junk

Recommended Posts

Guest jim king of junk

I have 2 air cooled cylinders that i know nothing about. The guy i purchased them from said they may be from a "henderson" car from the teens. These cylinders are cast iron with copper cooling fins, each cyl. has two push rod tubes and an attached aluminum rocker arm assembly at the top or side {depending on the layout} there is a small oiling tube for the rockers threaded into the rocker base. Cylinders are approximately 15" in length with rocker ass. and a bore of approx. 3 1/4". The intake and exhaust tubes are cast as part of the cyl and enter/exit on opposite sides. Valves are in the cylinders under rocker base and a spark plug hole alongside. I have looked but cannot figure out what these belong to.

I HAVE ADDED PHOTOS IN THE ALBUM UNDER JIM KING OF JUNK AIR COOLED CYLINDERS. THANKS FOR YOUR HELP

Edited by jim king of junk (see edit history)
Link to comment
Share on other sites

Guest jim king of junk

Thank you laden and steve. Sorry to the other fellas but you will have to excuse my computer ignorance. I haven't figured out how to post photos on the "thread" page. This is a real good site and I'm glad that others are willing to share their time to help. Thanks.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...