Rosiesdad Posted August 21, 2012 Share Posted August 21, 2012 Hi all. I have a strange problem with my 50 Super dual horn circuit. The horns work fine when the engine is not running but when running it barely squeaks. I checked the resistance of the control circuit. 70 ohms open 1 ohm closed. 6.3V on both relay terminals. I dressed the contacts. I don't get what's going on here. Any ideas?Thanks,Phil Link to comment Share on other sites More sharing options...
old-tank Posted August 21, 2012 Share Posted August 21, 2012 Always consider grounding problems. Run a jumper from the neg terminal of the battery to the horn bracket. If it is like my 55's you can pull the wire from the terminal on the side of the steering column and touch the wire to ground (should blow the horn) and see if any difference.Willie Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now