Jump to content

1936 Buick model 40 repair/replace heater core


rlcokc

Recommended Posts

<!-- google_ad_section_start -->Found out my heater core has several holes and I need replacement. Think repairs may be impossible but if anyone has heater core in good condition or suggestions for who can reclaim my old worn out heater core it would be much appreciated. Thanks

Rod

Link to comment
Share on other sites

Got the heater. ID tag on back of heater assembly shows Harrison #48. The core is 8 1/2 inch in diameter. The center hole for the electric motor is 2 3/4 inches. The core is 2 1/8 inch deep or high. The intake/outlet tubes are 8 1/8 inch measured from outside to outside, with the pipes themselves 5/8 inch. Intake/outlet pipes 8" deep and the distance between the pipes where heater hose attaches is 7 1/2" outside to outside. Not sure how to attach photo but if you give me your email address can attach if needed. Thanks and let me know if you have a core which will work. Thanks again.

Rod

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...