Jump to content

64 skylark front springs


Guest
 Share

Recommended Posts

I've got a 64' Skylark that the person before me put lowering front springs in which is fine for now as I am running the stock 300 engine. However, I recently did a front disc brake swap which lowered it even further and I intend on dropping in a 455 in the coming months. The question is, can someone recomend replacement front springs that will support the additional weight of the 455? I can get replacement stock springs easily but am not sure if they are heavy enough for the new engine. Thanks for any info.<P>Jeromy<P>------------------<BR>Jeromy Craig<BR>64 Skylark

Link to comment
Share on other sites

JC,<BR>That should not be too hard to find. The 455 Buick is just about the same weight as a small block Chevy. So all you should have to look for are SB Chevy springs for a 64-67 Chevelle and you should be in business. <BR>The other choice you have is to get springs for a 67 GS400 which will be comparable to what you need. Though the listing for that may be a bit harder to find than the Chevy.<BR>Good Luck,<BR>Mark<BR>

Link to comment
Share on other sites

Thanks Mark,<P>I believe I can find a listing for 67 GS400 springs, but if not, the chevelle springs should be no problem as you said. Thanks again.<BR>JC

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...