buick engine in australia

[Guest]

I have Buick v6 3.8 evenfire which I think comes from an 1985 REGAL, the problem is I'am<BR>not shore as it was imported an engine and trany. the engine no is 25506397.<BR>the engine is doing a great job in in my Volvo 264.<BR>as I am over here in in PERTH WESTEN AUSTRALIA.I need to find parts for it in the <BR>U.S.A. I hope some one can help.<BR>can efi fuel injecting be put on this engine?<BR>can I BUY a mechical advance distributor for<BR>this engine?<BR>hope you can help.<BR> <BR>Paul <P>------------------<BR>go45

[Guest John Chapman]

Paul,<P>G'day mate! I had some great liberty in Perth during my years in the US Navy. I won't elaborate on that for fear of domestic persecution and prosecution. Hehe.<P>As for the motor, I'd think you're best looking at the GN/GSX web sites for your parts. I've not a clue if you can put FI on the motor, but the GN/GNX discussion groups and forums should be able to help you.<P>Back in the late '60s, we had a Buick V6/Volvo Penta in our boat, so this isn't an unheard of match. What transmission are you using?<P>Sites of interest:<BR> <A HREF="http://www.turboregal.com/docs/gnlinks.htm" TARGET=_blank>http://www.turboregal.com/docs/gnlinks.htm</A> <A HREF="http://members.aol.com/ideapage/poston/" TARGET=_blank>http://members.aol.com/ideapage/poston/</A> <P><A HREF="http://www.kirbanperformance.com/" TARGET=_blank>http://www.kirbanperformance.com/</A> <P>Cheers,<BR>John<BR>------------------<BR>John Chapman<BR>BCA 35894<BR> jmchapman@aol.com <p>[This message has been edited by John Chapman (edited 09-01-2000).]

[BUICK3001964]

use an EDELBROCK performer intake and a HOLLEY projection its a stand alone throttle body injection system GM performance parts lists a n electronic distributor for a evenfire buick v6 Good luck<P>------------------<BR>Sean Etson