Guest ddhebert Posted April 21, 2012 Share Posted April 21, 2012 Hello everyone, I recently had a problem with my brakes ABS light was always on but then the RED Brake light came on and the pump would run with the brake applied only for a few seconds so I did some research and replaced the accumilator and seemed to be fixed. Then I looked at the relays because the ABS light was still on and a couple of wires seemed to be melted so I tried to repair them and pulled too many out and lost the diagram so, A very nice member e-mailed it to me I replaced the relay with a new one a still no power to pump but it will work if I jump the two red wires at the relay. Hey Thanks in advance for any help. Link to comment Share on other sites More sharing options...
Guest BarelyFit Posted April 21, 2012 Share Posted April 21, 2012 There is a fuse in there also sounds like it is shot. Link to comment Share on other sites More sharing options...
Guest ddhebert Posted April 21, 2012 Share Posted April 21, 2012 Checked fuses ok, when pump is hot wired it works great it builds the psi and a nice pedal.I'm stumpped ! Link to comment Share on other sites More sharing options...
Guest BarelyFit Posted April 21, 2012 Share Posted April 21, 2012 You checked the fuse box on the passenger side fender well? Small rectangular black box? Link to comment Share on other sites More sharing options...
Guest ddhebert Posted April 21, 2012 Share Posted April 21, 2012 Yes 2 30A fuses both good Link to comment Share on other sites More sharing options...
Guest ddhebert Posted April 21, 2012 Share Posted April 21, 2012 Could I wire it straight to the psi switch to the relay to run the pump ? Via fuse of course ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now